Care and cleaning of the cooktop.
Surface unit
Surface Units
To clean the surface units, turn the control to the highest setting for a minute. The coils will burn off any soil.
Drip pan
Do not immerse the surface units in liquids of any kind.
Do not clean the surface units in a dishwasher. Do not bend the surface unit plug terminals.
Do not attempt to clean, adjust or in any way repair the
Troubleshooting Tips Care and Cleaning Operating Instructions Safety Instructions
| Drip Pans | |
| ||
| To remove the drip pans for cleaning, | |
| the surface units must be removed first. | |
| To remove a surface unit: | |
| Make sure the surface units and drip | |
| pans are completely cool before touching | |
Drip pan | ||
them. |
Lift the surface unit about 1 inch above the drip pan and pull it out.
Surface |
unit |
Drip pan
Do not lift the surface unit more than 1 inch. If you do, it may not lie flat on the drip pan when you plug it back in.
Repeated lifting of the surface unit more than 1 inch above the drip pan can permanently damage the receptacle.
To clean the drip pans:
Clean the drip pans by hand with warm, soapy water.
To remove
Rinse with clean water and polish with a clean soft cloth.
The drip pans may also be cleaned in a dishwasher.
To replace the surface unit/drip pan:
IMPORTANT: Do not install the surface unit and drip pan separately into the cooktop because the surface unit may not lie flat on the drip pan when plugged in.
1 Put the surface unit plug terminals through the side opening of the drip pan.
Side opening in drip pan
Surface 
unit plug terminals
2 Hold the assembled surface unit and drip pan together and slide the plug terminals into the
receptacle
Consumer Support
Clean the area under the drip pans | 3 | Press the assemblies down to make | |
often. | |||
sure they are flat on the cooktop. | |||
may catch fire. | |||
|
|
Do not cover the drip pans with foil. Using foil so close to the receptacle could cause shock, fire or damage to the cooktop.
8