INSTALLATION INSTRUCTIONS
Before You Begin
Read these instructions completely and carefully.
NOTE TO
NOTE: This appliance must be properly grounded.
Tools You Will Need
•1/8″ Drill bit
•Electric or hand drill
•Flat blade screwdriver
•Pencil
•Ruler or tape measure and straightedge
•Hand saw or saber saw
Electrical Requirements
CAUTION: FOR PERSONAL SAFETY, REMOVE HOUSE FUSE OR CIRCUIT BREAKER BEFORE BEGINNING INSTALLATION.
This appliance must be supplied with the proper voltage and frequency and connected to an individual, properly grounded branch circuit, protected by a circuit breaker or time delay fuse, as noted on the rating plate.
All wire connections must be made in accordance with local codes and properly insulated. Check with your local utility for governing electrical codes and ordinances.
In the absence of local electrical codes, the National Electrical Code, ANSI/NFPA No.
A copy of the National Electrical Code can be obtained by writing to:
National Fire Protection Association Batterymarch Park
Quincy, MA 02260
If you fail to wire your counter unit in accordance with governing codes, you may create a hazardous condition.
CAUTION: The electrical power to the counter unit supply line must be shut off while line connections are being made.
Failure to do so could result in serious injury or death.
10