GE JP200, JP201 QUESTIONS? USE this Problem Solver, Problem Possible Cause

QUESTIONS?

USE THIS PROBLEM SOLVER

PROBLEM	POSSIBLE CAUSE
SURFACE UNITS DO	• Difficulty may be in the main distribution panel of your house caused by a
NOT WORK PROPERLY	blown oven circuit fuse, a tripped oven circuit breaker, the main fuse or the
	main circuit breaker, depending on the nature of the power supply. If a circuit
	breaker is involved, reset it. If the control box uses fuses, the oven fuse
	(a cartridge-type) should be changed BUT ONLY BY SOMEONE FAMILIAR
	WITH ELECTRICAL CIRCUITS. If after doing one of these procedures, the
	fuse blows or circuit breaker trips again, call for service.
	NOTE: Apartment tenants or condominium owners should request their building
	management to perform this check before calling for service.
	• Drip pans are not set securely in the cooktop.
	• Surface unit controls are not properly set or wrong surface unit control is
	set for unit you are using.
	• Surface units are not plugged in solidly.

If you need more help…call, toll free: GE Answer Center®

800.626.2000

consumer information service

14