Burner Assembly, Burner Grates | GE JGP630ER, JGP631ER instruction

Burner Assembly

The burner assemblies should be washed regularly and, of course, after spillovers.

Turn all controls off before removing burner parts and drip pans.

The electrode of the spark igniter is exposed beyond the top of the burner. When cleaning

the burner bowl, be Spark Ig

careful not to snag the electrode of the spark igniter with your cleaning cloth. Damage to the igniter could occur. Be careful not to push in any cooktop controls while cleaning the burner bowls. A slight electrical shock might result which could cause you to knock over hot cookware.

Burner Grate

I %=5? ‘urn’”””

I I

CAUTION: DO NOT OPERATE THE

BURNER WITHOUT ALL BURNER

PARTS IN PLACE.

The burner grates, burner tops and trim rings can be lifted off, making them easy to clean. Removing them gives you access to the burner bodies and burner bowls. (To avoid snagging cloth on spark igniters, leave burner tops in place when cleaning burner bowls.) There are two locating pins that fit into indentations at the bottom of the bowls. The pins allow the grate to sit level in one direction only. Do not remove the pins. Do not remove burner bowls from glass top units.

Wash burner parts with all-purpose non-abrasive cleaner and warm water. Soak stubborn soil. Dry them with a cloth—don’t reassemble them wet.

DO NOT clean in a self-cleaning oven or dishwasher.

To reassemble: Place the trim ring onto the burner body first. Before replacing the burner top, first examine the two tabs on its underside. The tabs are to fit into receiving slots in the burner body. When replacing burner grate, make sure the bottoms of the four larger burner grate fingers fit into the corresponding indentations in the burner bowl.

Burner Bowl

Spark Igniter

Burner Body

Burner Grates

Porcelain enamel burner grates should be washed often. Wash them in hot, soapy water and rinse with clean water. Dry the grates with a cloth—don’t put them back on the cooktop wet. When replacing the grates, be sure they’re positioned securely over the burners.

To get rid of burned-on food, place the grates in a covered container or plastic bag. Add 1/4 cup ammonia and let them soak for 30 minutes.

Wash, rinse well, and dry.

Although they’re durable, the grates will gradually lose their shine, regardless of the best care you can give them. This is due to their continual exposure to high temperatures.

Do not operate a burner for an extended period of time without cookware on the grate. The finish on the grate may chip without cookware to absorb the heat.

—.—. . . . —