GE JP676J manual Questions?, Use This Problem Solver

. .. ..	~	Questions?
— — –
— .-.— .——:–
.–-.—–.=
..—
. . . .	. =.:-.	Use This Problem Solver
	..—.
-:g,=-,,,{
—–.....—.-—–
PROBLEM		POSSIBLE CAUSE AND REMEDY
SURFACE UNITS ARE ● A fuse in your home may be blown or the circuit breaker tripped. Replace fuse or
N~ FUNCTIONING reset circuit breaker.
PROPERLY		● Surface units are not plugged in solidly.

	c Reflector pans are not set securely in the range top.
	● Surface unit controls are not properly set or wrong surface unit control set for unit
	you are using.
	● Entire surface unit module is not plugged in properly.
	c If either surface unit or glass-ceramic module fails to heat—switch the module to
	the other side of cooktop. If it operates on that side, then surface unit switch maybe
	at fault. If it does not heat, indications are that there is a malfunctioning component
	in the module.
GRILL/GRIDDLE	c Grill/Griddle Heating Unit is not plugged in solidly.
UNITS ARE NOT	● Grill unit control is not properly set or wrong control used.
FUNCIVONING
PROPERLY
FOODS STICK	c Griddle was not pre-seasoned before first use. Surface of grill or griddle was not
111 GRILL OR	greased before cooking.
GRIDDLE	. Food is being cooked with too high of a heat setting.
	● Nonstick coating of griddle has been damaged by use of sharp instruments
	or abrasive cleaners.
EXCESSIVE SMOKE	● Accumulated grease in drip pan or food soils on grate are causing excess smoke.
FROM GRILLED	● Fats not trimmed from meats prior to cooking.
MEATS

—

—

If vou need more help... call, toll free: The GE Answer Cen~er@ ‘ 800.626.2000

consumer information service

—

18