HOW TO CONTROL A SYSTEM USING A WINDOWS-BASED PC
1.Click the application icon located on the PC desktop.
2.Select the protocol for the unit and then enter the unit address.
3.Select the port: COM1 or COM2.
4.Click the PTZ button.
PTZ CONTROL MENU
Iris Open: Tap the Open button to make a selection.
Iris Close: Tap the Close button to cancel a selection.
Focus Near: Tap the Near button to focus near.
Focus Far: Tap the Far button to focus far.
Zoom In: Tap the In button to zoom near.
Zoom Out: Tap the Out button to zoom far.
Preset 95: Tap the PGM button to access the programming menu for the system. Refer to the operation and programming manual supplied with the Spectra, Esprit, or ExSite system.
8 |