GE ZBD6600, ZBD6400, ZBD6900, ZBD6500 Care and Cleaning/Optional Accessories, Water Fill Level

Page 23

Care and Cleaning/Optional Accessories

Dishwasher

Water Fill Level

For best performance, check the water fill level of your dishwasher.

Once the dishwasher is fully connected, run it through a complete RINSE ONLY cycle to ensure it is emptying and filling correctly. For low water pressure situations run the RINSE ONLY cycle 3 times. Halfway through the final RINSE ONLY cycle, pause the dishwasher and check the water level inside the dishwasher. If the water level is not above the minimum water level (marked on the lower spray support tower), increase the fill level.

1.Ensure the dishwasher is not running through a cycle. Depress the WATER TEMP button for ten seconds until the second buzzer sounds (except on ZBD6600 models).

2.Press the START/CANCEL button to select fill time, as per chart (65 seconds is the factory setting).

3.To test time, press DELAY START. The dishwasher will start filling. Listen for the dishwasher to complete filling. Once filled, the fill level must be checked to ensure fill time is correct.

4.Once complete, press the WATER TEMP button to exit fill time mode.

Maximum level

Minimum level

Continue to press the

START/CANCEL button until the desired indicator is illuminated.

Cycle Status

 

Indicators

Fill time

 

 

SENSING

60 seconds

WASHING

65 seconds

RINSING

70 seconds

DRYING

80 seconds

CLEAN

90 seconds

 

 

Change the

Dishwasher’s Appearance for ZBD6400 and ZBD6500 only

You can change the door panel appearance of your dishwasher by ordering one of these optional accessories:

1/4″ Wood Panel Trim Kit ZPF625B (Black) ZPF625W (White)

3/4″ Trimless Panel Kit ZPF675B (Black) ZPF675W (White)

These accessories are available at extra cost by calling in the USA, 800.626.2002. In Canada, call 1.888.880.3030.

Specify accessory number when ordering.

23

Image 23
Contents Page Introduction ContentsIf you received Damaged dishwasher Before using your dishwasherIf you need service Write down the model & serial numbersAvertissement ’HYDROGÈNE EST UN GAZ Explosif Water Heater SafetyProper Installation and Maintenance When Using Your Dishwasher Control Settings High Start a wash loadControl Panel/Operation ZBD6400 & ZBD6500 Heat DRY Control Panel ZBD6600WASH, China Crystal or Rinse only cycles Operation ZBD6600 Rinse only Control Panel ZBD6700 & ZBD6900Sani Control Panel/Operation ZBD6700 & ZBD6900Sanitize Control Panel ZBD7000 & ZBD7100Control Panel/Operation ZBD7000 & ZBD7100 Control Settings Start a Wash LoadCycles Detergents Using the dishwasherUse a Rinse Agent Upper Wash Tower Adjusting Upper Rack HeightLoading the Racks Upper RackSilverware Basket Air Gap Care and CleaningExterior Interior Protect Against Freezing Pull up to remove Removing Cleaning Spray Arms Glass TrapWash Filters Change Dishwasher’s Appearance for ZBD6400 and ZBD6500 only Care and Cleaning/Optional AccessoriesWater Fill Level Before You Call For Service Questions? Use this problem solverDishes and flatware Problem Possible Cause What to doNot clean Suds in the tubSpots and filming on Beeping every Indicators flashing orDishwasher won’t start All cycle statusParts Accessories Consumer ServicesONE-YEAR Warranty for customers in the USAFrom the Date Original Purchase Warranty for customers in Canada Registration Ownership Product Consumer Consumer Product Ownership Registration
Related manuals
Manual 32 pages 31.98 Kb Manual 16 pages 7.37 Kb

ZBD7000, ZBD7100, ZBD6700, ZBD6500, ZBD6600 specifications

General Electric (GE) has long been a leader in home appliances, and its line of dishwashers exemplifies this tradition of innovation and quality. The GE ZBD6400, ZBD6900, ZBD6600, ZBD6500, and ZBD6700 models represent a spectrum of advanced features designed to elevate the dishwashing experience.

The GE ZBD6400 is known for its efficient performance and spacious interior. With a capacity to hold up to 14 place settings, this model is perfect for families and gatherings. It boasts a Piranha hard food disposer, which pulverizes food scraps to prevent clogging and ensure a clean wash. Furthermore, the ZBD6400 includes various wash cycles, including a High-Temperature Wash option, to tackle even the toughest stains.

Moving to the ZBD6900, this model incorporates cutting-edge SmartDry technology, which enhances drying effectiveness by using special sensors to adjust drying time based on load size and soil level. Its ultra-quiet operation ensures that it runs silently, making it suitable for open-concept kitchens. The model also features a stainless steel interior, enhancing durability and providing better heat retention during washing cycles.

The GE ZBD6600 combines convenience and efficiency with its Advanced wash system. This system includes multiple spray arms and a rotating arm to ensure thorough cleaning. The model’s one-piece door and sleek design add a modern touch to any kitchen decor. Additionally, the ZBD6600 is designed with energy efficiency in mind, drawing less water and energy while maintaining superior cleaning performance.

In the ZBD6500, GE enhances usability with its built-in soil sensor technology that detects food particles and adjusts wash cycles accordingly. This model features a large capacity and intuitive controls, allowing users to customize their washing experience seamlessly. The ZBD6500 also includes a delay start option, providing flexibility for busy households.

Lastly, the ZBD6700 is equipped with the innovative bottle wash feature, enabling it to clean tall items like sports bottles and baby bottles effortlessly. Its sleek design and high-performance filtering system not only enhance cleanliness but also contribute to the durability of the appliance.

Each of these GE dishwasher models exemplifies reliability and effective performance, tailored to meet the diverse needs of modern households. With their advanced features, technologies, and thoughtful design, GE continues to be a trusted name in dishwashing solutions.