Introduction
The SIRIUS Home Satellite Radio Receiver must be connected to the windowsill antenna (supplied) to process the SIRIUS signal. The Receiver recognizes and decodes the incoming SIRIUS program information and provides an audio signal to your stereo receiving equipment or other audio output equipment.
NOTE: The SIRIUS signal can be received and processed virtually anywhere as long as there are no obvious obstructions such as nearby buildings, high terrain, parking garages or tunnels which would block the satellite antenna from having a clear view of the sky. The Receiver is typically installed in an accessible location close to your stereo receiving equipment to permit integration as part of your home stereo system.
Installing Your SIRIUS Receiver
You can begin to enjoy Sirius Satellite Radio as soon as the Receiver installation is complete. Set up your Receiver using the following installation instructions.
Installation/Wiring Precautions
1.Make sure the power supply adapter cable is not connected to an AC wall outlet until all interconnections have been made and verified. The power supply adapter cable should be connected last.
2.Do not install the Receiver in the locations exposed to direct sunlight or in areas subject to extreme temperatures.
3.Incorrect installation may cause damage to the system.
4.During antenna placement/installation, refer to the Antenna Placement procedure on page 12.
10