GE GSD4330, GSD4320, GSD4335, GSD4310, GSD4315, GSD4325, 49-5847-1 Proper Installation Maintenance

Page 5

Use this appliance only for its intended purpose as described in this Owner’s Manual.

PROPER INSTALLATION

AND MAINTENANCE

This dishwasher must be properly installed and located in accordance with the Installation Instructions before it is used. If you did not receive an Installation Instructions sheet with your dishwasher, you can receive one by calling us toll-free at the GE Answer Center®, 800.626.2000.

Safety Information

Operating

■Connect to a grounded metal, permanent wiring system; or run an equipment- grounding conductor with the circuit conductors and connect to the equipment- grounding terminal or lead of the appliance.

■Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service representative if you are in doubt whether the appliance is properly grounded.

■Dispose of discarded appliances and shipping or packing material properly.

■Do not attempt to repair or replace any part of your dishwasher unless it is specifically recommended in this manual. All other servicing should be referred to a qualified technician.

■To minimize the possibility of electric shock, disconnect this appliance from the power supply before attempting any maintenance. NOTE: Turning the dishwasher off does not disconnect the appliance from the power supply. We recommend having a qualified technician service your appliance.

Instructions

Troubleshooting Tips

Customer Service

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents GE Answer Center DishwashersWrite the model and serial numbers here Staple sales slip or cancelled check hereCongratulations You Are Now Part of the GE Family Review the Section on GE & You Service PartnershipSafety Information Water Heater Safety Proper Installation Maintenance Do NOT… When Using Your Dishwasher Read and follow This Safety Information carefullyCycle Selections Control SettingsAbout the dishwasher control panel Start OptionsCycle Sequence About the dishwasher cycle sequenceWater Time Cycles Cycle SequencePress the START/RESET START/RESET padFlashing control panel lights Flashing LightsCheck the Water Temperature Using the dishwasherUsing the Dishwasher Door Use Jet-Dry Rinse AgentForget to Add a Dish? Proper Use of DetergentWash Tower Loading the dishwasher racksUpper Rack Silverware Basket Lower RackUpper Rack-10 place setting Loading 12 and 10 place settings…Upper Rack-12 place setting Lower Rack-10 place settingColor Panels Wood Panel Trim Kit Trimless Panel Kit About optional accessoriesProtect Against Freezing Caring for the dishwasherDoes Your Dishwasher Have an Air Gap? Air gap is easy to cleanBefore you call for service… Bottom of the tub Water standingWater won’t pump Out of the tubUse HI Temp Wash Not cleanDishes and flatware Glassware Cloudiness onBlack or gray Marks on dishesSelect HI Temp Rinse Dishes don’t dryAnd/or Heated DRY Control panelPage Page Page Page General Electric Company Consumer Product Ownership Registration What GE Will Not Cover GE Dishwasher WarrantyGE Will Replace TDD 800-TDD-GEAC Service Telephone NumbersIn-Home Repair Service 800-GE-CARES
Top Page Image Contents