About the dishwasher control panel. (For models with sensor: EDW6000 Series,
GHDA650 Series, GLD6200 Series, GLD6300 Series, and GLD6500 Series)
SafetyInstructions | You can locate your model number on the tub wall just inside the door. Throughout this manual, features and appearance | |||
may vary from your model. |
|
|
| |
| 1 |
|
| |
|
|
|
| |
| 3 | 5 | 4 | 2 |
Control Settings
Instructions |
| 1 |
| Status Indicator Lights | |
|
|
| The Status display tells you what’s happening while the dishwasher is in operation and may flash, indicating a | ||
|
|
|
| ||
|
|
|
| malfunction (see page 8). The lights will come ON indicating the sequence of operation the dishwasher is in. | |
|
|
|
|
| |
|
|
|
| SENSING Displayed while the sensor is measuring the amount of soil and temperature of water. | |
|
|
|
| (on some models) The dishwasher will adjust the selected cycle to achieve optimal performance. | |
Operating |
|
|
| WASHING Displayed during prewash and main wash periods. | |
|
|
| DRYING Displayed during HEATED DRY. | ||
|
|
|
| (on some models) |
|
|
|
|
| RINSING Displayed during rinse periods. | |
|
|
|
| (on some models) |
|
|
|
|
| (on some models) |
|
|
|
|
|
| |
|
|
|
| SANITIZED Displayed when cycle has met sanitization conditions. Light remains ON until door is opened. | |
|
|
|
| CLEAN Displayed when a wash cycle is complete. The light stays ON as a reminder that the dishes are clean until the door is | |
|
|
|
| relatched or until another cycle is selected. | |
|
|
|
| Time Remaining Display (on some models) | |
Tips | 2 |
| |||
|
|
| During operation, the display shows the minutes remaining until the cycle is complete. The display may adjust | ||
|
|
|
| ||
Troubleshooting |
|
|
| the remaining time while the sensing light is on. The time displayed at the start of each cycle may change from | |
|
|
| Heavy 8.5 gal., 84 min. | ||
|
|
|
| the factory setting as the unit customizes itself to home use. During a delay start, the display will show hours of | |
|
|
|
| time remaining until the cycle starts. | |
|
| 3 |
| Cycles |
|
|
|
|
| The light above the selected pad will be ON to indicate which cycle has been selected. | |
|
|
|
| This dishwasher is equipped with a dirt and temperature sensor. Cycle length and time will vary depending on the soil | |
|
|
|
| level and temperature. | |
|
|
|
|
|
|
|
|
|
| or SANI WASH | Medium 7.3 gal., 78 min. |
|
|
|
|
| Light 6.1 gal., 75 min. |
|
|
|
|
| This cycle raises the water temperature in the final rinse to sanitize your dishware. The cycle length will vary |
|
|
|
|
| depending on the temperature of your inlet water. |
|
|
|
|
| NOTE: The |
|
|
|
|
| after the main wash portion or if the incoming water temperature is so low that adequate water heating cannot |
Support |
|
|
|
| be achieved, the sanitizing conditions may not be met. In these cases, the sanitized light will not illuminate at |
|
|
|
| the end of the cycle. | |
|
|
|
|
| |
|
|
|
|
| NOTE: NSF certified residential dishwashers are not intended for licensed food establishments. |
|
|
|
|
|
|
Consumer |
|
|
| POTS | Heavy 10.9 gal., 102 min. |
|
|
| & PANS | Medium 8.5 gal., 78 min. | |
|
|
|
| ||
|
|
|
|
| Light 7.3 gal., 73 min. |
|
|
|
|
| This cycle is meant for heavily soiled dishes or cookware with |
|
|
|
|
| Everyday dishes are safe to be used in this cycle. |
|
|
|
| NORMAL WASH | Heavy 8.5 gal., 65 min. |
|
|
|
|
| Medium 7.3 gal., 60 min. |
| 4 |
|
|
| Light 4.9 gal., 49 min. |
|
|
|
| This cycle is for medium/heavily soiled dishes and glassware. | |
|
|
|
|
|