Sirius Satellite Radio SIR-PNR1 manual Wiring and Cable Connections, Antenna Input

Wiring and Cable Connections

A

SIR-PNR1

PIONEER COMPATIBLE

SIRIUS SATELLITE RADIO TUNER

IP BUS

B C D

Antenna Input

Connect the right-angle SMB connector from the antenna. Push firmly to attach.

IP-Bus Output Connector

Use the supplied IP-BUS cable to connect to the Pioneer Headunit or Audio Processor – See “System Connection Examples” for more specific details.

IP-BUS Input Connector Connect to optional Pioneer audio equipment like CD Changers - See “System Connection Examples” for more specific details.

		1 Open
1	2	2 Yellow -- Battery (+12VDC)
		3 Black -- Ground (-)
3	4	4 Open

AAntenna Input (SMB)

BIP-Bus Output Connector (BLACK)

CIP-Bus Input Connector (BLUE)

DPower Connector

IN	FUSE BOX	UTO
	FILTER &

Power harness with serviceable fuse box

Power Harness Connector After the wiring connections are complete, plug the wiring harness into the connector. Make sure to insert firmly to lock the connector in place.

*NOTE* BE SURE TO CONNECT THE BATTERY (Yellow) AND GROUND (Black) WIRES CORRECTLY. IF THEY ARE CROSSED, THE FUSE INSTALLED IN THE POWER HARNESS FUSE BOX WILL BLOW. IF THE FUSE BLOWS, YOU WILL NEED TO REPLACE IT.

8 SIR-PNR1 Installation Guide