Greenheck Fan BDF manual Parts List, Warranty

Page 8

Parts List

NOTE

Each fan bears a manufacturer’s nameplate with model number and serial number embossed. This information will assist the local Greenheck representative and the factory in providing service and replacement parts. Before taking any corrective action, make certain unit is not capable of operation during repairs.

CAUTION

A fan manufactured with an explosion resistant motor does not certify the entire unit to be explosion proof. Refer to UL Listing Mark for the fans approved usage.

MOTORSCROLL

HOUSING

BEARING

WHEEL

ACCESS

PANEL

SHAFT

ISOLATOR

MOTOR

SHAFT

DRIVE

BELT

PULLEY

 

PULLEY

SUPPORT

 

 

 

Warranty

Greenheck warrants this equipment to be free from defects in material and workmanship for a period of one year from the purchase date. Any units or parts which prove defective during the warranty period will be replaced at our option when returned to our factory, transportation prepaid. Motors are warranted by the motor manufacturer for a period of one year. Should motors furnished by Greenheck prove defective during this period, they should be returned to the nearest authorized motor service station. Greenheck will not be responsible for any removal or installation costs.

As a result of our commitment to continuous improvement, Greenheck reserves the right to change specifications without notice.

Greenheck Catalog BDF provides additional information describing the equipment, fan performance, available accessories, and specification data.

AMCA Publication 410-96, Safety Practices for Users and Installers of Industrial and Commercial Fans, provides additional safety information. This publication can be obtained from AMCA International, Inc. at: www.amca.org.

®

Phone: (715) 359-6171 • Fax: (715) 355-2399E-mail: gfcinfo@greenheck.com • Website: www.greenheck.com

8

458341 • Model BDF • Belt Drive Duct Fan, Rev. 5, September 2008

Copyright 2008 © Greenheck Fan Corp

Image 8
Contents General Safety Information Model BDF Belt Drive Duct FanInspection and Maintenance During Storage ReceivingUnpacking HandlingChart 1 BDF Fan Dimensions Pre Start-Up Checks Vibration Isolators After fan is moved toMaintenance BDF Belt/Bearing Maintenance BDF UnitOperation BDF Inspection BDFTroubleshooting Recommended Relubrication Frequency in MonthsIsolator Parts List Standing Support Isolator Hanging Support IsolatorParts List Warranty