Maytag W10329357A Water and Ice Dispenser, Ice Production Rate, Remember, Dispense Ice and Water

Page 11

Ice Production Rate

■Allow 24 hours to produce the first batch of ice. Discard the first three batches of ice produced.

■The ice maker should produce approximately 8 to 12 batches of ice in a 24-hour period.

■To increase ice production, lower the freezer and refrigerator temperature. See “Using the Controls.” Wait 24 hours between adjustments.

Remember

■The quality of your ice will be only as good as the quality of the water supplied to your ice maker. Avoid connecting the ice maker to a softened water supply. Water softener chemicals (such as salt) can damage parts of the ice maker and lead to poor quality ice. If a softened water supply cannot be avoided, make sure the water softener is operating properly and is well maintained.

■Do not use anything sharp to break up the ice in the bin. This can cause damage to the ice bin and dispenser mechanism.

■Do not store anything on top of the ice maker or in the ice storage bin.

Water and Ice Dispenser

IMPORTANT:

■After connecting the refrigerator to a water source, flush the water system. Use a sturdy container to depress and hold the water dispenser pad for 5 seconds, then release it for

5 seconds. Repeat until water begins to flow. Once water begins to flow, continue depressing and releasing the dispenser pad (5 seconds on, 5 seconds off) until a total of

4 gal. (15 L) has been dispensed. This will flush air from the filter and water dispensing system, and prepare the water filter for use. Additional flushing may be required in some households. As air is cleared from the system, water may spurt out of the dispenser.

NOTE: After 5 minutes of continuous dispensing, the dispenser will stop dispensing water to avoid flooding. To continue dispensing, remove the container and press the dispensing lever again.

■The dispenser will dispense either water or cubed ice.

■Allow 24 hours for the refrigerator to cool down and chill water. Dispense enough water every week to maintain a fresh supply.

■Allow 24 hours to produce the first batch of ice. Discard the first three batches of ice produced.

Dispense Ice and Water

WARNING

Cut Hazard

Use a sturdy glass when dispensing ice.

Failure to do so can result in cuts.

1.Select water or cubed ice by touching the word “water” or “ice” on the control panel. The light above the control indicates your selection.

2.Press a sturdy container against the dispenser lever.

IMPORTANT: You do not need to apply a lot of pressure to the lever in order to activate the dispenser. Pressing hard will not make the water or ice dispense faster or in greater quantities.

3.Remove the container to stop dispensing.

Dispenser Light

NOTES:

■The dispenser lights are LEDs which should not need to be changed.

■When you use the dispenser, the lever will automatically turn the light on. If you want the light to be on continuously, you may choose either On or Auto.

Auto: The light sensor monitors the light level in the room. The dispenser light will illuminate at half-power when the light level is low. To activate the Auto option press the “light” button. The Auto indicator light will illuminate.

On: For continuous light, press the “light” button a second time. The On indicator light will illuminate.

Off: To turn the dispenser light off, press the “light” button a third time.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Refrigerator User Instructions Refrigerator SafetyBefore You Throw Away Your Old Refrigerator or Freezer Installation InstructionsClean Before Using Unpack the RefrigeratorRecommended Grounding Method Location RequirementsElectrical Requirements Reverse Osmosis Water Supply Water Supply RequirementsConnect the Water Supply Water PressureRemove and Replace Handles Style Complete the InstallationRefrigerator Doors and Drawer Connect to RefrigeratorRemove Drawer Front Remove Doors and HingesReplace Doors and Hinges Remove and Replace Freezer DrawerDrawer Front Removal Drawer Front Replacement Refrigerator USE Adjust the DoorsUsing the Controls Temperature ControlsTemp Alarm Adjusting ControlsAdditional Control Center Features Fast Cool To Adjust Set Point TemperaturesIce Maker and Ice Storage Bin Crisper Humidity ControlDispense Ice and Water Water and Ice DispenserIce Production Rate RememberWater Filtration System CleaningRefrigerator Care Refrigerator Operation TroubleshootingChanging the Light Bulb Ice and Water Temperature and MoistureWater from the dispenser is warm Water Filter CertificationsWater and ice dispenser will not operate properly Water is leaking from the dispenser systemApplication Guidelines/Water Supply Parameters Performance Data SheetsModel UKF8001AXX-200 Capacity 200 Gallons 757 Liters This limited warranty does not cover Maytag Major Appliance WarrantyLimited Warranty Items Excluded from WarrantyPage Sécurité DU Réfrigérateur Instructions Dutilisation DU RéfrigérateurDéballage du réfrigérateur Instructions D’INSTALLATIONExigences demplacement Pression de leau Méthode recommandée de mise à la terreSpécifications électriques Spécifications de l’alimentation en eauRaccordement au réfrigérateur Raccordement de la canalisation deauRaccordement à une canalisation d’eau Dépose des portes et des charnières Achever l’installationDépose et réinstallation des poignées Style Portes et tiroir du réfrigérateurDépose de la façade du tiroir Réinstallation des portes et des charnièresRetirer et réinstaller le tiroir du congélateur Réinstallation de la façade du tiroirDépose et réinstallation de la porte Ajustement des portes Utilisation des commandesCommandes de température Utilisation DU RéfrigérateurDésactivation/activation du refroidissement Ajustement des commandesHumidity Control commande dhumidité sur certains modèles Pour ajuster les réglages de températureMode Sabbat SAB Temp Alarm alarme de dépassement de températureDoor Alarm avertisseur de la porte Alarme ALTaux de production de glaçons Dépose et réinstallation du bac d’entreposage à glaçonsDistributeur d’eau et de glaçons Mise en marche/arrêt de la machine à glaçonsSystème de filtration de leau Nettoyage de votre réfrigérateur Remplacement de l’ampoule d’éclairageEntretien DU Réfrigérateur NettoyageFonctionnement du réfrigérateur DépannageIl y a une accumulation dhumidité à lintérieur Température et humiditéLa température est trop élevée La température est trop basse dans le réfrigérateurLeau du distributeur est tiède Système de filtration d’eau intérieur Feuilles DE Données SUR LA PerformanceModèle UKF8001AXX-200 /Capacité 200 gallons 757 litres La présente garantie limitée ne couvre pas Garantie DE Gros Appareil Ménager MaytagGarantie Limitée Éléments Exclus DE LA GarantiePage W10329357A SP PN W10329358A

W10329357A specifications

The Maytag W10329357A is a high-performance appliance part designed for a variety of Maytag washing machines. This component plays a crucial role in optimizing the washing process, delivering reliability and efficiency. One of the standout features of the W10329357A is its robust construction, which ensures durability over time. Made from high-quality materials, this part can withstand the rigors of regular use while maintaining peak performance.

Another significant characteristic of the Maytag W10329357A is its compatibility with many Maytag models, making it a versatile option for homeowners. This broad applicability helps streamline maintenance and repairs, ensuring that consumers can find the right part for their specific needs without hassle. The part is engineered for easy installation, allowing users to replace worn-out components with minimal effort, thus reducing downtime.

In terms of technology, the Maytag W10329357A incorporates advanced design principles that enhance the washing machine's functionality. For instance, it may feature innovative designs that improve water flow, leading to more efficient cleaning cycles. This improvement not only helps in achieving cleaner laundry but also conserves water and energy, aligning with modern sustainability efforts.

The W10329357A also supports noise reduction technologies that contribute to a quieter washing experience. This is especially beneficial for households where laundry is done around the clock, ensuring that appliance operation does not disrupt daily activities. Alongside its noise-reducing properties, the part is designed to minimize vibrations, further enhancing stability during the washing process.

Overall, the Maytag W10329357A represents a blend of efficiency, durability, and technology, making it a smart choice for those looking to maintain or upgrade their Maytag washing machines. Whether you are experiencing issues with your current unit or simply wish to enhance its performance, the W10329357A can serve as a reliable solution, proving that quality and innovation can go hand-in-hand in the realm of home appliances. With this component, users can expect improved results in their laundry routines, leading to fresher and cleaner clothes every time.
Top Page Image Contents