Maytag W10329357A Adjusting Controls, Additional Control Center Features Fast Cool, Temp Alarm

Page 9

■The recommended settings should be correct for normal household refrigerator use. The controls are set correctly when milk or juice is as cold as you like and when ice cream is firm.

■If the temperature is too warm or too cold in the refrigerator or freezer, first check the air vents to be sure they are not blocked before adjusting the controls.

Adjusting Controls

The REFRIGERATOR control adjusts the refrigerator compartment temperature. The FREEZER control adjusts the freezer compartment temperature.

If you need to adjust the temperature in either the refrigerator or freezer compartment, use the settings listed in the chart as a guide.

Additional Control Center Features

Fast Cool

The Fast Cool feature assists with periods of high refrigerator use, full grocery loads, or temporarily warm room temperatures.

■Press the Fast Cool touch pad to set the freezer and refrigerator to the lowest temperature settings. Press the Fast Cool touch pad again to return to the normal refrigerator set point.

NOTE: The Fast Cool feature will automatically shut off in approximately 2 hours. When fast cool is on, the temperature cannot be adjusted.

To Adjust Set Point Temperatures:

The first touch of the up or down arrow touch pad displays the current temperature set point.

■Press the up or down arrow touch pads until the desired temperature set point is displayed.

NOTE: Except when first turning on the refrigerator, do not adjust either temperature control more than one setting at a time. Wait 24 hours between adjustments for the temperature to stabilize.

CONDITION/REASON:

ADJUSTMENT:

 

 

REFRIGERATOR too warm

REFRIGERATOR

 

Control 1° lower

 

 

FREEZER too warm/too little ice

FREEZER Control 1°

 

lower

 

 

REFRIGERATOR too cold

REFRIGERATOR

 

Control 1° higher

 

 

FREEZER too cold

FREEZER Control 1°

 

higher

Cooling On/Off

IMPORTANT:

■Depending on your model you may have a control center with an On/Off button (Style 1), or you may have a control center without an On/Off button (Style 2).

■The On/Off control turns off cooling for both compartments and turns off the dispenser. It does not disconnect power to the refrigerator.

Style 1 – Press and hold the On/Off button for three seconds. The red LED will light up to indicate that cooling is Off. Press the On/Off button again to turn on the cooling. The LED will turn off.

Style 2 – Press the Freezer up arrow touch pad until OFF appears in the display. Neither compartment will cool. Press the Freezer or Refrigerator down arrow touch pad to turn the cooling back on.

Humidity Control (on some models)

The Humidity Control feature turns on a heater to help reduce moisture on the door hinge seal. Use in humid environments or when you notice moisture on the door hinge seal. The refrigerator uses more energy when Humidity Control is on.

■Press Humidity Control to turn on the door heater. Press Humidity Control again to turn off the heater. The LED will be illuminated when Humidity Control is on.

Temp Alarm

The Temp Alarm feature provides temperature information in the event of a power outage.

Power outage: During a power outage, if the temperatures in the refrigerator and freezer compartments exceed normal operating temperatures, the highest temperature reached will be displayed.

■Press the Temp Alarm touch pad until the indicator light is lit, to turn on this feature. Press and hold Temp Alarm for

3 seconds until the indicator light goes off to turn off this feature.

Temperature alarm: An alarm will sound repeatedly if the freezer or refrigerator compartment temperatures exceed normal operating temperatures for an hour or more.

The temperature displays will alternately show the current temperatures and the highest temperatures the compartments reached.

■Press the Temp Alarm touch pad once to stop the audible alarm and alternating temperature displays. The Temp Alarm light will continue to flash until the refrigerator returns to the set temperature.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Refrigerator User Instructions Refrigerator SafetyClean Before Using Installation InstructionsUnpack the Refrigerator Before You Throw Away Your Old Refrigerator or FreezerLocation Requirements Electrical RequirementsRecommended Grounding Method Connect the Water Supply Water Supply RequirementsWater Pressure Reverse Osmosis Water SupplyRefrigerator Doors and Drawer Complete the InstallationConnect to Refrigerator Remove and Replace Handles StyleReplace Doors and Hinges Remove Doors and HingesRemove and Replace Freezer Drawer Remove Drawer FrontDrawer Front Removal Drawer Front Replacement Using the Controls Adjust the DoorsTemperature Controls Refrigerator USEAdditional Control Center Features Fast Cool Adjusting ControlsTo Adjust Set Point Temperatures Temp AlarmIce Maker and Ice Storage Bin Crisper Humidity ControlIce Production Rate Water and Ice DispenserRemember Dispense Ice and WaterCleaning Refrigerator CareWater Filtration System Troubleshooting Changing the Light BulbRefrigerator Operation Ice and Water Temperature and MoistureWater and ice dispenser will not operate properly Water Filter CertificationsWater is leaking from the dispenser system Water from the dispenser is warmApplication Guidelines/Water Supply Parameters Performance Data SheetsModel UKF8001AXX-200 Capacity 200 Gallons 757 Liters Limited Warranty Maytag Major Appliance WarrantyItems Excluded from Warranty This limited warranty does not coverPage Sécurité DU Réfrigérateur Instructions Dutilisation DU RéfrigérateurInstructions D’INSTALLATION Exigences demplacementDéballage du réfrigérateur Spécifications électriques Méthode recommandée de mise à la terreSpécifications de l’alimentation en eau Pression de leauRaccordement de la canalisation deau Raccordement à une canalisation d’eauRaccordement au réfrigérateur Dépose et réinstallation des poignées Style Achever l’installationPortes et tiroir du réfrigérateur Dépose des portes et des charnièresRetirer et réinstaller le tiroir du congélateur Réinstallation des portes et des charnièresRéinstallation de la façade du tiroir Dépose de la façade du tiroirDépose et réinstallation de la porte Commandes de température Utilisation des commandesUtilisation DU Réfrigérateur Ajustement des portesHumidity Control commande dhumidité sur certains modèles Ajustement des commandesPour ajuster les réglages de température Désactivation/activation du refroidissementDoor Alarm avertisseur de la porte Temp Alarm alarme de dépassement de températureAlarme AL Mode Sabbat SABDistributeur d’eau et de glaçons Dépose et réinstallation du bac d’entreposage à glaçonsMise en marche/arrêt de la machine à glaçons Taux de production de glaçonsSystème de filtration de leau Entretien DU Réfrigérateur Remplacement de l’ampoule d’éclairageNettoyage Nettoyage de votre réfrigérateurFonctionnement du réfrigérateur DépannageLa température est trop élevée Température et humiditéLa température est trop basse dans le réfrigérateur Il y a une accumulation dhumidité à lintérieurLeau du distributeur est tiède Système de filtration d’eau intérieur Feuilles DE Données SUR LA PerformanceModèle UKF8001AXX-200 /Capacité 200 gallons 757 litres Garantie Limitée Garantie DE Gros Appareil Ménager MaytagÉléments Exclus DE LA Garantie La présente garantie limitée ne couvre pasPage W10329357A SP PN W10329358A

W10329357A specifications

The Maytag W10329357A is a high-performance appliance part designed for a variety of Maytag washing machines. This component plays a crucial role in optimizing the washing process, delivering reliability and efficiency. One of the standout features of the W10329357A is its robust construction, which ensures durability over time. Made from high-quality materials, this part can withstand the rigors of regular use while maintaining peak performance.

Another significant characteristic of the Maytag W10329357A is its compatibility with many Maytag models, making it a versatile option for homeowners. This broad applicability helps streamline maintenance and repairs, ensuring that consumers can find the right part for their specific needs without hassle. The part is engineered for easy installation, allowing users to replace worn-out components with minimal effort, thus reducing downtime.

In terms of technology, the Maytag W10329357A incorporates advanced design principles that enhance the washing machine's functionality. For instance, it may feature innovative designs that improve water flow, leading to more efficient cleaning cycles. This improvement not only helps in achieving cleaner laundry but also conserves water and energy, aligning with modern sustainability efforts.

The W10329357A also supports noise reduction technologies that contribute to a quieter washing experience. This is especially beneficial for households where laundry is done around the clock, ensuring that appliance operation does not disrupt daily activities. Alongside its noise-reducing properties, the part is designed to minimize vibrations, further enhancing stability during the washing process.

Overall, the Maytag W10329357A represents a blend of efficiency, durability, and technology, making it a smart choice for those looking to maintain or upgrade their Maytag washing machines. Whether you are experiencing issues with your current unit or simply wish to enhance its performance, the W10329357A can serve as a reliable solution, proving that quality and innovation can go hand-in-hand in the realm of home appliances. With this component, users can expect improved results in their laundry routines, leading to fresher and cleaner clothes every time.
Top Page Image Contents