Vehicle Installation: Running the Antenna Cable
1.Turn the ST1 receiver power OFF and remove it from the mount; unplug the Car Power Adapter from the cigarette lighter; unplug the antenna from the Receiver.
2.Route the cable from the antenna to the vehicle’s interior by tucking it underneath the rubber molding around rear window, as shown.
3.Route the cable from the lowest point of the rear window into the trunk. Take advantage of any existing cable channels or wiring conduits.
•For SUVs, minivans &
4.From the trunk, route the cable around the passenger compartment and to the back of the cradle.
•Do not pull the wire across sharp edges that could damage it.
•Keep the wire away from areas where it could become tangled in driver’s and passenger’s feet.
5.Plug the antenna back into the ST1 Receiver’s ANTENNA jack.
6.Plug the car power adapter into the cigarette lighter.
IT IS RECOMMENDED THAT YOU UNPLUG THE CAR POWER ADAPTER AFTER THE VEHICLE’S IGNITION IS TURNED OFF.
| 13 |
Starmate ST1 User Guide |