Channel Block
The Sirius Starmate Receiver has the ability to lockout the use of any channels you do not want others to access without your permission. The locked channel will not appear when the user changes channels with the Channel Switch. When the user tries to access a locked channel using the Direct Tuning function, the “Enter Code” screen will be displayed and the channel will not be accessed until the proper code is entered.
While in the “Menu Options” List mode, follow the steps below to Lock a channel:
1.Use the Channel Switch to highlight the “Channel Block”. Press SELECT.
2.Select “Lock/Unlock” from the Lock Options Menu (below left) and press SELECT.
3.Use the Channel Switch to select the channel you want to lock. Press SELECT (below right).
| Channel Block |
|
| 001 | CH Name | |
|
|
|
|
|
|
|
| Lock/Unlock |
| 002 | CH | Name L | |
| Edit Code |
| 003 | CH | Name | |
|
|
|
|
|
|
|
Changing the Lock/Unlock Code
The first time the Lock/Unlock function is accessed, the user must enter the default lock code. The default lock code is “1111”. This code can be maintained or changed. To change the lock code, perform the following procedure while in the “Menu Options” List mode:
1.Use the Channel Switch to highlight “Lock Options”. Press SELECT.
2.Select “Edit Code” from the Lock Options Menu and press SELECT.
3.Enter your current code or the default code “1111”.
4.The “New Code” prompt will appear. Enter your new four digit code using the
5.The lock code is now changed.
Note: You can use this same method to edit the code after it has changed from the default.
Enter Code
# _ _ _ _
26