Fisher & Paykel HS60CSRW1, HS60CSRM1, HS60CSRX1 Height of rangehood, Ducting options

Installation instructions

Height of rangehood

Please read the entire instructions BEFORE installing the rangehood.

3

Ascertain the desired installation height of the rangehood. When installing the rangehood, the lower edge of the unit must be a minimum of 600 mm (650 mm for gas cooker) above the cooking surface.

The recommended position for the hood is 650 mm above the cooktop.

Any installation above 750 mm will compromise the extraction performance.

A = 600 min (electric cook top)

A = 650 min (gas cook top)

Not less than 650 mm Gas Burner

Fig.2 Positioning

Ducting options

Some authorities require rangehoods to be vented outside. Attention should be given to ensure that any applicable regulations concerning the discharge of exhaust air is fulfilled.

Top ducting through roof Rear ducted Side ducting

Fig.3 Ducting options

285x 85 mm rectangular, or 150 mm diameter round ducting (using a rectangular-to-round adaptor) can be used in conjunction with this model.

For optimal efficiency, use smooth-walled ducting for reduced noise and increased airflow. Flexible ducting should only be used as a last resort.

Note: we recommend an Easy Fit by Fisher & Paykel or a UNIDUCT ducting system, products that have been designed to expel air efficiently.