Fisher & Paykel RB905, RB365 dimensions Product Dimensions, Cabinetry Dimensions

2PRODUCT DIMENSIONS

Installation diagrams for illustration purposes only
C	B
D

3CABINETRY DIMENSIONS

Installation diagrams for illustration purposes only

An internal shelf can be used as an alternative to spacer blocks to position the product at the correct height. In this case additional cutouts will be required. Refer to Step 7.

A

A

B

C

H

D

G

G

F

E

F

Product dimensions (inches [mm])	CoolDrawer
RB36S RB90S

A	overall height of product (inc. installation brackets)	25 /” (640)
B	overall width of product	33 /” (855)
C	overall depth of product (excl. drawer panel; inc. power cord)	21 /” (557)
D	depth of drawer (open) (excl. handle)	20 ½” (520)

Cabinetry dimensions (inches [mm])		CoolDrawer RB36S RB90S
A	overall width of cabinetry frame	36” (914)
B	minimum inside width of cabinetry frame	34” (864)
C	height from frame inner face to top of spacer block	25 /” (644)
D	height below top of spacer block to frame inner*	max. 4 /” (120)
	(to allow for outlet duct height)	min. /” (21)
E	minimum height of toe kick	3” (75)
F	minimum depth** of toe kick	1 /” (40)
G	minimum distance from front of cabinetry to rear wall	22 /” (560)
H	width of spacer blocks	1 /” (50)

*Minimum internal height of cabinetry frame can be 25 /” (644mm) if outlet duct is not used.

**All depth measurements are taken from the front face of the cabinetry frame (not drawer panel)

Minimum clearances (inches [mm])

/” (2 mm)

½” (13 mm)