Fisher & Paykel OR90SDBGFPX installation instructions Levelling the cooker

10Installation instructions

Fig. 3a Screw/unscrew the feet to get the required height

0 + 8 mm

Levelling the cooker

Important!

Using the supplied adjustable feet is MANDATORY. For safety reasons and to ensure adequate ventilation, the cooker chassis MUST NOT sit directly on the floor, a plinth, or other support surface.

For ease of installation, first remove the kickstrip. To remove the kickstrip, unscrew the two screws holding it in place.

The cooker is already fitted with four levelling feet.

Level the cooker by screwing or unscrewing the feet.

Make sure you follow the instructions in Figs. 3a, 3b, and 3c.

Note: nuts are supplied with the cooker in a separate kit.

Do not refit the kickstrip until you have installed the anti-tip bracket.

+ 8 mm + 13 mm

Fig. 3b Do not use the supplied nuts for height adjustments between 0 and 8 mm

Fig. 3c Use the supplied nuts for height adjustments between 8 and 13 mm