Fisher & Paykel OR120 To connect the gas supply, Do not use a naked flame to test for leaks

Page 13

Installation instructions

11

Notes:

Flexible hoses can be used where the sited ambient temperature of the hose does not exceed 70°C. These hoses must be manufactured in accordance with BS669 part 1 and be of the correct construction for the type of gas being used.

Gas hoses designed for natural gas MUST NOT be used for supplying LPG gas (LPG gas hoses can be identified by a either a red band or stripe on the rubber outer coating of the hose).

The hose should not be crushed or trapped or be in contact with sharp or abrasive edges. It should also not be subjected to corrosion by acidic cleansing agents.

To connect the gas supply:

1Fit the 1/2” BSP (female) connector (supplied with the cooker in a separate kit) to the gas inlet at the rear of the cooker interposing the gasket. Check the correct positioning of the connector as shown and always use two suitable spanners (Fig 6b).

2Connect the gas supply to the gas inlet at the rear of the cooker. If the pipe has to cross the cooker, it must be positioned under the protected area of the cooker (see Fig 6a)

3 To avoid damage to the appliance gas rail inlet pipe tighten the fittings using two suitable spanners (Fig. 6b).

4 Using a suitable leak detection fluid solution (e.g. Rocol) check each gas connection one at a time by brushing the solution over the connection. The presence of bubbles will indicate a leak. If there is a leak, tighten the fitting and then recheck for leaks.

IMPORTANT!

Fig. 6a

Do not use a naked flame to test for leaks.

Cooker manifold

Manifold male pipe fitting

1/2” G cylindrical (ISO 228-1) male

Gasket (*)

1/2” G cylindrical (ISO 228-1) female

Connector (*)

1/2” BSP (female)

(*) Supplied with the appliance in a separate kit.

 

 

 

10 mm

 

20 mm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

20 mm

 

 

 

 

 

10 mm

 

 

 

 

 

 

 

 

 

Fig. 6b

Image 13
Contents Installation instructions and User guide Page Contents Installation Safety and warningsGeneral ElectricalGas Operation Important safety precautions Location Installation instructionsAssembling the backguard Class Subclass Levelling the cooker Ventilation requirements GB & IE only Moving the cookerInstallation and service regulations Gas installation GB & IE onlyInstallation to Natural gas Installation to Liquid Petroleum gasDo not use a naked flame to test for leaks To connect the gas supplyFeeder cable section Type H05RR-F Connecting the feeder cableReplacing the burner injectors Maintenance instructionsSemi-rapid Burner Triple ring wok burner Dual burnerSemi-rapid and triple ring wok burners Setting the burner minimumOutside crowns of Dual burner Light the Dual burner Lubrication of the gas taps Table for the choice of the Injectors Cat II 2H 3+Gas cooking hob controls Right oven controls Introducing your cookerLeft drawer only controls Left oven controlsGas burners Using your cooktopFlame failure safety feature Before using your cooktopUsing the dual gas burners Lighting the cooktopIf the flame is irregular If the cooktop does not lightDiameters of pans which may be used on the cooktop Choosing a burnerWok stand Problem Cooktop troubleshootingClock display Function Temperature Control buttons Using your ovens for the first timeClock and timer Function knob Using your ovenBake Cooking functionsFAN Bake Automatic cooking To use the moisture selector Using your warmer drawerReversible rack General advice Care and cleaningCleaning the outside of the cooker Cleaning the gas cooktopReplacing the burners Burner parts and pan supportsReplacing the triple-ring wok burner Replacing the triple-ring wok burnerGas valves Correct position of dual burnersRemoving the side racks Cleaning the inside of your ovensCleaning the fat filter Cleaning the enamel cavityRemoving the inner and middle panes of glass Cleaning the oven door glassCare and cleaning Replacing the middle and inner panes of glass Care and cleaning Removing the oven doors Replacing the drawers Removing the drawersRemoving the oven lamp Replacing the oven lampBefore you call for service or assistance Warranty and servicePage Page Page GB IE
Related manuals
Manual 48 pages 8.14 Kb Manual 52 pages 7.67 Kb Manual 52 pages 3.98 Kb

OR120 specifications

Fisher & Paykel OR120 is a versatile and high-performance range cooker designed to meet the culinary needs of both home chefs and professionals. Boasting a combination of innovative technologies and thoughtful design, the OR120 delivers exceptional cooking flexibility and efficiency, allowing users to create a variety of dishes seamlessly.

One of the standout features of the OR120 is its dual fuel configuration. This system combines the responsive heat of gas burners with the even and controlled cooking of an electric oven. This dual fuel setup offers enhanced cooking precision, ensuring that users can achieve the best results for diverse cooking techniques, from rapid boiling to slow roasting.

The OR120 features a spacious oven compartment with a generous capacity, making it ideal for preparing large meals or multiple dishes simultaneously. Equipped with multiple cooking functions, including bake, broil, and convection, the oven ensures even heat distribution for consistent cooking results. The convection feature is particularly useful, as it circulates hot air around the oven, reducing cooking times and enhancing flavor development.

For ease of usability, the OR120 comes equipped with intuitive controls and a large digital display. This user-friendly interface allows for precise temperature adjustments and cooking time settings, providing users complete control over their culinary creations. Additionally, the integrated timers and cooking progress indicators enhance the cooking experience, providing convenience and assurance.

Aesthetic appeal is another hallmark of the OR120. Its sleek design, available in a range of finishes, such as stainless steel and classic white, ensures that it complements any kitchen décor. The high-quality materials used in its construction not only enhance its durability but also make it easy to clean.

Safety is a priority in the OR120 design, with features such as flame failure protection and a cooling fan to prevent overheating. This ensures peace of mind while cooking, allowing users to focus on the task at hand.

In summary, Fisher & Paykel’s OR120 stands out as a premium choice for those seeking a combination of performance, versatility, and style in a range cooker. With features designed to enhance cooking efficiency and ease of use, it’s a valuable asset for any kitchen. Whether for everyday meals or special occasions, the OR120 can elevate the cooking experience, allowing users to explore their culinary passions with confidence.