Fisher & Paykel OR120 Connecting the feeder cable, Feeder cable section Type H05RR-F

12Installation instructions

Connecting the feeder cable

To connect the feeder cable to the cooker: Remove the four screws that hold shield “A” behind the cooker.

Open the cable clamp “D” completely. Check the position of the U bolts on the terminal block “B” (Fig. 7a) according to the diagram in Fig. 7b and Fig. 7c.

Insert the feeder cable into the cable clamp “D” and into the cable protector “C”. The supply cable must be of a suitable size for the current requirements of the appliance; see ‘Feeder cable section’ following. Connect the phase and earth cables to terminal “B” according to Figs. 7b and 7c. Pull the feeder cable and block it with the cable clamp “D”.

Re-mount shield “A”.

Note: the earth conductor must be left about 30 mm longer than the others.

Feeder cable section “TYPE H05RR-F”

230V 3 x 2.5 mm2 (**)

(**)- Connection with wall box connection.

B

C

DA

Fig. 7a

1 2 3 4 5

L1	N(L2)	PE
RedRed orr
Brown		GreenGre
( )
(Live)		and
Blackl	or	Yellowel
		(Ear )
Blue		(Earth)
or Blue

(Neutral)(N tral)

Fig. 7b

230 V

1 2 3 4 5

L1 N (L2) PE

PE Earth

NNeutral

LLive

Fig. 7c