Electrical requirements

Installation instructions

Important!

Installation must be carried out according to the manufacturer's instructions.

Incorrect installation may cause harm and damage to people, animals or property, for which the manufacturer accepts no responsibility.

If the installation requires alterations to the domestic electrical system, call a qualified electrician. The electrician should also check that the socket cable section is suitable for the power drawn by the appliance.

Before carrying out any work on the electrical section of the appliance, it must be disconnected from the electricity supply.

Connection to a good earth wiring system is absolutely essential and mandatory. The manufacturer accepts no responsibility for any inconvenience caused by failure to comply with this rule.

The appliance must be connected to the mains electricity supply checking that the voltage corresponds to the value given in the rating plate and that the electrical cable sections can withstand the load specified on the plate.

The plug must be connected to an earthed socket in compliance with safety standards.

If the appliance is supplied without plug, fit a standard plug which is suitable for the power consumed by the appliance.

The wires in the power supply cable are coloured in accordance with the following code: Green/Yellow = Earth, Blue = Neutral, Brown = Active.

If the colours of the wires in the power cable to the appliance do not correspond with the coloured markings identifying the terminals in the junction terminal, proceed as follows:

1The wire which is coloured green and yellow must be connected to the terminal marked E (Earth) or coloured Green.

2The wire which is coloured blue must be connected to the terminal marked N (Neutral) or coloured Black.

3The wire which is coloured brown must be connected to the terminal marked L (Live) or A

(Active) or coloured Red.

A suitable disconnection switch must be incorporated in the permanent wiring, mounted and positioned to comply with the local wiring rules and regulations. The switch must be of an approved type installed in the fixed wiring and provide a 3 mm air gap contact separation in all poles in accordance with the local wiring rules.

In Australia and New Zealand, a switch of the approved type with a 3 mm air gap must be installed in the active (phase) conductor of the fixed wiring.

The power supply cable must not touch the hot parts and must be positioned so that it does not exceed 50°C above ambient.

Once the appliance has been installed, the switch or socket must always be accessible.

If the power supply cable is damaged, it must be replaced by the manufacturer or its Service Agent or a similarly qualified person in order to avoid a hazard.

CG905, CG604 specifications

The Fisher & Paykel CG604 is a standout in the world of cooking appliances, offering a perfect blend of functionality, aesthetics, and innovation. This gas cooktop is designed for both the serious home chef and casual cook, featuring four gas burners that provide precise heating for various cooking styles.

One of the main highlights of the CG604 is its flexible burner configurations. The cooktop includes a powerful dual-wok burner, offering high heat for quick boiling and stir-frying. The additional burners come in different sizes, catering to everything from simmering sauces to boiling pasta. With precise flame control, users can easily adjust heat levels, ensuring that delicate recipes are executed flawlessly.

The CG604 is equipped with advanced technologies that enhance the cooking experience. It features a flame failure safety device, which automatically shuts off the gas supply if the flame is extinguished, ensuring safety in the kitchen. The cooktop also includes a quick ignition system, allowing for instant lighting of the burners.

The surface of the CG604 is made from high-quality, easy-to-clean stainless steel, coupled with durable cast iron trivets that provide stability and support for pots and pans. The trivets are designed for seamless movement, enabling users to slide cookware easily from one burner to another without lifting.

In terms of design, the Fisher & Paykel CG604 boasts a sleek and modern aesthetic, seamlessly fitting into any kitchen decor. Its minimalist design features smooth lines and a professional look, making it an appealing choice for contemporary kitchens. The cooktop's controls are conveniently located, ensuring easy access and operation for users.

Furthermore, the CG604 is designed for easy installation and compatibility with various kitchen layouts. With its gas safety features and robust construction, this cooktop not only meets but exceeds industry standards, making it a reliable choice for home cooking enthusiasts.

Whether you’re boiling, sautéing, or roasting, the Fisher & Paykel CG604 cooktop offers versatility and control, making it an essential tool in any culinary arsenal. With its advanced technologies and elegant design, it elevates the cooking experience, allowing chefs of all levels to unleash their creativity in the kitchen.