Leak testing, Minimum setting or turn-down

Fisher & Paykel CG365C, CG365D installation instructions Leak testing, Minimum setting or turn-down

Installation instructions 15

Leak testing

Leak testing of the appliance shall be conducted according to the manufacturer’s instructions.

The appliance and its individual shut-off valve must be disconnected from the gas supply piping system during any pressure testing of that system in excess of ½ psi (3.5kPa).

The appliance must be isolated from the gas supply piping system by closing its individual manual shut-off valve during any pressure testing of the gas supply piping system at test pressures at or less than ½ psi (3.5 kPa).

Maximum inlet gas supply pressure 20” W.C. (5 kPa)

Minimum gas supply pressure for regulator testing 5” W.C. Natural Gas, 12” W.C. LP Gas.

After installing the gas supply and making all connections, check thoroughly for possible leaks:

1Turn all control dials on unit to “off” position.

2 Open the valve on the gas supply.

3 Using a leak detection fluid (eg Rocol leak detection spray), check each gas connection one at a time by brushing the solution over the connection. The presence of bubbles will indicate a leak.

4 If necessary, tighten the fitting and recheck for leaks.

5 Turn on burner valve and light each burner.

6 Check for a clear blue flame without yellow tipping. If burners show any abnormalities, check that they are located properly and in line with the injector orifice.

Minimum setting or turn-down

After installation check the minimum setting. This has been preset at the factory for NG but needs to be checked and then reset if necessary. To adjust for minimum setting (if applicable), you will need a Ø 7⁄64 “ x 1 ¾” (Ø 2.5 x 45 mm) screwdriver.

(A suitable screwdriver is available as Fisher & Paykel spare part FB200467).

1Ignite the burner and set the dial to its minimum position.

2 Remove the dials.

3 Rotate the turn-down screw (down the hole in the spindle) while holding the shaft. Rotate slowly until a minimum regular flame is achieved. (The flame will diminish when the screw is turned clockwise and increase when turned counter-clockwise).

4 When the setting is right, check regulation by quickly

rotating the dial from the maximum to the minimum delivery position. The flame must not go out and the auto-reignition should not click. Replace the dial.

CA (EN)

Fig.6 Minimum setting adjustment

CG365C, CG365D specifications

The Fisher & Paykel CG365D is a premier gas cooktop that embodies innovation and precision in culinary design. With its sleek and modern aesthetic, it seamlessly fits into any contemporary kitchen while offering exceptional performance. This cooktop is a popular choice among home chefs who value both functionality and style.

One of the key features of the CG365D is its robust design, which includes five burners crafted from high-grade stainless steel. This material not only enhances durability but also provides an easy-to-clean surface that maintains its shine over time. The cooktop is available in a classic stainless steel finish, adding a touch of elegance to your kitchen space.

The burners offer a range of power outputs, catering to various cooking needs. The dual flame wok burner is a standout feature, capable of delivering intense heat while offering precise control. This makes it ideal for stir-frying, deep-frying, and quickly boiling water, ensuring your meals are cooked to perfection every time.

Equipped with intuitive dial controls, the CG365D allows for effortless adjustments to heat levels. Each burner features a unique flame-failure safety device, ensuring a safe cooking experience by automatically shutting off the gas supply if the flame goes out. This safety feature provides peace of mind, especially in bustling kitchen environments.

Another remarkable technology integrated into this cooktop is the easy-to-remove, dishwasher-safe trivets. These cast iron components are designed to provide excellent heat retention while ensuring that you can easily clean and maintain the cooking surface. Additionally, the cooktop's design includes a continuous surface that allows for seamless movement of pots and pans from burner to burner.

The Fisher & Paykel CG365D also features a minimalist design with hidden controls, which reduces clutter and enhances the overall look of your kitchen. The precision cooking allows for better heat distribution, promoting even cooking regardless of the dish you’re preparing.

In summary, the Fisher & Paykel CG365D gas cooktop is built for those who appreciate quality, safety, and style. With its powerful burners, innovative technologies, and elegant design, it stands out as a premier choice for modern kitchens. This cooktop not only meets the demands of serious chefs but also elevates the culinary experience with its user-friendly features and thoughtful design. Whether you are simmering sauces or searing meats, the CG365D ensures that you can cook with confidence and finesse.