Fisher & Paykel DD36STI Panel Preparation, Panel height, ⁄8-13⁄16 18 -20 mm panel thickness

2PANEL PREPARATION

Installation diagrams for illustration purposes only

The following calculations assume the top of the panel is aligned with the top of the adjacent cabinetry:

	.5mm)
	.1⁄8”(2
	min
	.1⁄16”(2mm)
min		panelof
	B
Air	gap
		height
	min. 5⁄16”(8 mm)
	Air gap

A

width	ofpanel
panel

	.5	mm
.2
min

min.

1⁄16”

(2 mm)

width of the panel

Measure A (the width between adjacent door/drawer fronts) and write it in the first box below, then complete the equation.

	A		door clearance			panel width
eg.	35 7⁄16”	- 2 x		1⁄8”	=	35 ¼”
	(900 mm)			(2.5 mm)		(895 mm)
	A		door clearance			panel width
		- 2 x			=
			(min. 1⁄8” (2.5 mm))			(min. 33 11⁄16” (855 mm))

height of the panel

5⁄16”

Measure B (door/drawer height (or equivalent)) and write it in the first box below, then complete the equation.

(8 mm) Air gap

Installation diagrams for illustration purposes only								.
						near	floor	level
					DishDrawer®
				the
			if installing
Use	this	diagram

	B	- 1⁄16” (2 mm) Air gap (TOP)
eg.	18 7⁄8”
	(480 mm)	- 5⁄16” (8 mm) Air gap (BOTTOM)
	B	- 1⁄16” (2 mm) Air gap (TOP)
		- 5⁄16” (8 mm) Air gap (BOTTOM)

panel height

=18 ½”

(470 mm)

panel height

=

(min. 18 ½” (470 mm))

panel
		5⁄16”
	5⁄16”
		(8 mm)
	(8 mm)	Air gap
	Air gap

Note: when the top of the DishDrawer® has to be lower than the adjacent cabinetry, the panel can be increased in height.

Front Panel material

5⁄8”-13⁄16” (18 -20 mm) panel thickness

Adequately sealed to withstand moisture (122OF/50OC @ 80% RH)