Fisher & Paykel DD603 manual Troubleshooting

Page 24

t r o u b l e s h o o t i n g

If the does not appear to be operating properly, check this chart below and correct where possible.

Problem

Possible Causes

What to Do

 

 

 

will not start

Power supply is not connected.

Connect the power supply.

 

The drawer is not properly closed.

Ensure the drawer is firmly closed.

 

Lock feature is on.

Turn the Lock off. Hold down the LOCK button until the

 

 

‘lock’ symbol (prefinished models) or the green light

 

 

(integrated models) disappears.

 

START/PAUSE button not pressed.

Press the START/PAUSE button.

 

 

 

Excess water in the

Drain hose(s) bent or kinked.

Straighten the drain hose(s).

 

Blocked filters and/or drain hose(s).

Clean the filter plate/drain filter. Unblock the drain

 

 

hose(s). Refer to the user maintenance section.

 

 

 

Water marks on the dishes

Insufficient rinse agent.

Ensure there is enough rinse agent in the dispenser.

 

Rinse agent setting too low.

Increase the rinse agent setting.

 

overloaded/incorrectly

Refer to the section on loading.

 

loaded.

 

 

Insufficient or no salt in the water softener.

Ensure there is enough salt in the water softener

 

(DD603H and DS603H models only)

and/or increase the water softener setting.

 

 

 

Unclean dishes

Wash program unsuitable for the load.

Refer to the wash programs section for a suitable

 

 

wash program, or the soils were too heavily baked

 

 

on and dishes may need soaking.

 

Spray arm unable to rotate.

Ensure no items are obstructing the spray arm path.

 

overloaded/incorrectly

Refer to the section on loading.

 

loaded.

 

 

Filter plate/drain filter is incorrectly inserted.

Refer to the user maintenance section.

 

Detergent put in the wrong compartment.

Detergent must be placed in the large compartment.

 

Excessive food not removed from

Scrape all food scaps off dinnerware prior to loading.

 

dinnerware prior to cleaning.

 

 

Unsuitable detergent.

Use recommended brands of dishwasher detergent.

 

Not enough detergent.

Refer to the detergent section or the

 

 

detergent manufacturer’s instructions.

 

Spray arm holes are blocked.

Clean the spray arm.

 

Filter plate/drain filter is blocked.

Clean the filter plate and drain filter.

 

Mega rack incorrectly installed.

Refer to the accessories section for correct

 

 

installation.

 

Insufficient salt in the water softener.

Ensure there is enough salt in the water softener and

 

(DD603H and DS603H models only)

you may need to increase the water softener setting if

 

 

the problem persists.

 

 

 

Page 23 Page 25
Image 24
Page 23 Page 25
Contents E R G U I D E N t e n t s Prefinished E r g u i d eT r o d u c t i o n E c i a l t a l e n t s E r a t i n g i n s t r u c t i o n s prefinished model Check StartPause FinishE r a t i n g i n s t r u c t i o n s integrated model Load Dishes Detergent & Rinse AidDelay Start Mode optional C e s s o r i e s BasketPlate Insert Cutlery BasketHOW to Load Your A d i n gT e r g e n t d i s p e n s e r Filling the Detergent DispenserDetergent Quantities Persons away from WhenRinse Agent Indicator Light Hard Water Situations N s e a g e n t d i s p e n s e rSoft Water Situations Setting Grains per Gallon gpg Parts per Million ppm To Ensure Optimum Performance of the Water Softener100 250 350 450 550 Above 625ppm, the performance of your will declineHow to Fill the Salt Reservoir Salt Indicator LightSalt Reservoir OpenR i n g f o r y o u r d i n n e r w a r e S h p r o g r a m s Heavy Normal Fast Delicate RinseHeavy Normal Fast Delicate S h w a s h e r s t a n d a r d s t e s t Enter the Option Adjustment Mode as explained previously T i o n a d j u s t m e n t m o d ePrefinished and Integrated Models Release the Lock and ECO buttonsHow to Remove the Auto Power Option How to Install the Closed Drawer Option Cleaning E r m a i n t e n a n c e i n s t r u c t i o n sIridium Finish Matt Stainless Steel White or Black FinishCleaning the Drain Filter, Spray Arm and Filter Plate Lift and remove the drain filter OutEnsure the drain filter is flush with the filter plate Replace the spray arm back onto the impellerTroubleshooting Incorrectly placed Correct placement Service Agent Will not openMay stain the inside Run Through a wash programFault codes How to Recognize a Fault CodeHow to Attend to a Fault Code Operating Installation Do not install or store the where it will beTo the power supply Enclosure panels are properly in placeMaintenance OperationalDamage to Supply to the offThis warranty does not cover Correcting faults caused by the userBefore you call for service or assistance S t o m e r c a r eUSA if you need assistance E c k l i s t Is square and level Is fastened securely to the cabinetryCopyright Reserved Fisher & Paykel
Related manuals
Manual 2 pages 11.26 Kb
Top Page Image Contents