7
Start
Close the 
. Press the START/PAUSE button 
to initiate the wash program.
This button also functions as the Delay Start.
Pause
To pause the 
during its wash cycle, press the START/PAUSE button and wait for three beeps before opening. Restart by pressing the START/PAUSE button. Forcing
8
Finish
The 
will beep six times to indicate the end of the wash program. At the end of the wash program the drying fan will continue to run for a set time or until the drawer is opened. The fan assists with drying and uses negligible amounts of energy. It is normal for some water to remain in the drain filter area after the wash program is complete.
Lock Button (optional)
The Lock button 
activates/ deactivates the Keylock or the Childlock functions.
Keylock
The Keylock function disables all the buttons on the
. To activate, press and hold the LOCK button until you hear one beep (about 3 seconds).
Childlock
The Childlock feature locks the 
and disables all the buttons. To activate, press and hold the LOCK button until you hear two beeps (about 5 seconds).
To cancel Keylock or Childlock, press and hold the LOCK button until the green light above the LOCK button disappears.
the drawer open in
Note
If the 
is operating and a power failure occurs, it will stop. The 
may be unable to be opened during this time. When the power supply is resumed, the 
will restart in the same part of the wash program.
DELAY START MODE (optional)
The start of the wash program can be delayed from 1 to 12 hours. To activate Delay Start:
1.Press and hold the START/PAUSE button until the light above the START/PAUSE button turns orange.
2.The 
will emit a ‘beep’ as you hold down the START/PAUSE button, each beep indicates another hour delay. Continue holding the START/PAUSE button until the desired delay time is reached.
3.The 
will start once the delay time has elapsed and the
drawer is closed.
To cancel Delay Start, press the POWER button or hold the START/PAUSE button until the light turns green.
7