Fisher & Paykel DD24DI7, DD24DT 7, DD24DCB7, DD24DDFX7 Final Checklist, Troubleshooting, Spray arm

Page 21

25FINAL CHECKLIST

Check all parts are installed.

Ensure product is level, securely fastened to the cabinetry and opens and closes freely. The drawers must be free to fully close with no resistance from the cabinetry.

Ensure inlet hose to water supply has supplied rubber washer fitted, and that it’s tightened a further half turn after seal contact.

Ensure any knockouts or plugs in drain connection have been drilled out and drain connection has been made.

The drain hose joiner must not support the weight of excess hose material. Keep drain hose as fully extended as possible to prevent sagging. Any excess length of drain hose should be kept on the dishwasher side of the highloop.

If connecting the drain hose to the sink trap, ensure the Highloop is a minimum 6” (150 mm) higher than the drain hose joiner.

Ensure any packaging or tape securing the racks is removed from the drawers. Turn on the power and water supplies, then open the drawers. You should hear a beep and see a program indicator light up on the internal control panel.

Check the spray arms are in place and free to rotate.

Spray arm

Add three cups of water into each drawer. Press on the internal control panel until the indicator of the ‘Rinse’ program lights up. Close the drawers and press to start the program.

After the Rinse program has finished, ensure the dishwasher has run and drained correctly.

Check water supply and drainage connection for leakage.

26 TROUBLESHOOTING

21

 

Excessive water remaining above the filter plate, after the rinse cycle

Check for a kinked drain hose or blocked waste connection, highloop not properly installed or drain hose not routed correctly.

No water supply (This is displayed as a ‘U1’ fault -- see section ‘If there is a fault’ in the User guide for how to recognise this fault on models without a display.)

Check water is connected and turned on.

The dishwasher is beeping continuously

There is a fault. See section ‘If there is a fault’ in the User guide for further information and instructions.

No program indicator lights up when the drawer is opened

Ensure power is connected and is switched on. If it is and still no indicator lights up, see the ‘Preference options’ section of the ‘Quick start guide’. An option called ‘Open drawer auto power-on’ may need to be turned on.

Water around water supply and drainage connections

Check connections, existing plumbing and hoses for leaks. Check rubber washer and hose clamp are correctly fitted.

If product is tipping

Ensure the product is secured to the cabinetry.

If front panels are misaligned

Check and relevel product. Check the cabinetry is square. For Integrated models, check and adjust front panel alignment if necessary.

Drawer doesn’t close properly

Ensure nothing is obstructing the drawer from closing properly eg sound insulation, hoses or drawer latches.

If a problem occurs, consult the ‘Troubleshooting’ section of the User guide. If after checking these points you still need assistance, please refer to the Service & Warranty book for warranty details and your nearest Authorized Service Center, or contact us through our website, listed below.

Important!

SAVE THESE INSTRUCTIONS

The models shown in this document may not be available in all markets and are subject to change at any time. For current details about model and specification availability in your country, please visit our local website listed at the end of this document or contact your local Fisher & Paykel dealer.

www.fisherpaykel.com www.fisherpaykel.ca

Page 20 Page 21
Image 21
Page 20 Page 21
Contents Installation Instructions Standard Height Double Models Tall Height Double Models Follow the Installation Sequence Relevant to Your ModelImportant Safety Instructions Adjustment Drain hose Wire clip Clamp Support JoinerMoisture protection Hexagonal Tape Socket for feet Edge ProtectorOptionally Hard Wiring Prior to Installation Ensure the release tabs on Both sides are reset fullyRunners Product Dimensions Cabinetry Dimensions Width of ALL Panels 17 3⁄8 Tape must Cavity PreparationMaximum Distance of Hoses & Cord from Chassis Edge 11a Pull Through Hoses & Push Into the Cavity 10a Attach Side Mounting BracketsBy twisting the feet. Then take Through hoses and cord Ensuring they don’t getTrim moulding 12a Secure to the Cabinetry on the SidesPage Product by twisting Through hoses and cord 10b Pull Through Hoses & Push Into the Cavity12b Secure to the Cabinetry on the Sides 14b Refit the Drawer Onto the RunnersEnsure the release tabs on Do not overtighten screw Ground the Panels Attach Panels to Product Attach Panels to Panel BracketsThere must be at least Align bottom of panels with bottom of bracketsFitting a Custom Toekick Panel 882 Connect Inlet Hose TO* HOT Water 24 Switch Product on750 34¾Final Checklist TroubleshootingSpray arm

DD24D 7, DD24DCX7, DD24DCW7, DD24DDFX7, DD24DCB7 specifications

Fisher & Paykel has crafted a reputation for excellence in kitchen design with its innovative line of dishwashers, including the DD24DI7, DD24DT7, DD24DCB7, DD24DDFX7, and DD24DCW7. These models bring a blend of cutting-edge technology, sleek aesthetics, and smart functionality to streamline one of the most labor-intensive tasks in the kitchen.

One of the standout features across these models is the SmartDrive technology, which employs a direct drive motor and electronic control to optimize washing performance. This results in quieter operation and increased reliability, ensuring your dishwasher can handle even the most stubborn stains and tough grime with optimal efficiency.

The DD24 series is designed to fit seamlessly into any kitchen environment. With a robust 24-inch width, they provide ample capacity for a full load of dishes. The flexible racking system allows for easy customization of the interior layout to accommodate varying dish sizes, maximizing loading efficiency and ensuring thorough cleaning.

In terms of energy efficiency, all these models meet stringent energy standards, helping households reduce their environmental impact without compromising on performance. Features like Eco-Friendly wash cycles utilize less water and energy, while still achieving impeccable results.

The DD24DT7 features a unique top control panel that offers a modern aesthetic while simplifying operation. Meanwhile, the DD24DCB7 showcases the benefits of a fully integrated design, allowing it to blend seamlessly with cabinetry for a cohesive look. The DD24DDFX7 presents a stylish stainless steel finish that adds a touch of sophistication to any kitchen décor.

Wet dry technology is another significant innovation in these models. This means you can wash fragile or delicate items alongside heavier cookware without the worry of damage. Different wash modes, including Heavy, Normal, and Quick cycles, ensure that there's a setting for every cleaning need.

Quiet operation is another hallmark feature, with noise levels as low as 44dBA, allowing for peaceful kitchen environments even during cleaning cycles. The reliable performance and sophisticated design make Fisher & Paykel dishwashers an appealing choice for contemporary kitchens.

In addition to their practical features, these dishwashers are designed to be easy to maintain and clean. With removable filters and easy-access spray arms, users can ensure their dishwashers remain in top condition with minimal effort. Overall, Fisher & Paykel's DD24 series combines advanced technology with a focus on user convenience, making these dishwashers a superb addition to any modern kitchen.
Top Page Image Contents