using your dishwasher
Use this option when you want to dry your dishes more completely.
The temperature rises to 162 ˚F (72 ˚C) in the fi nal rinse cycle and dry time is increased.
If you select the this option, electricity consumption is increased.
The next time you use the dishwasher, the Dry+ option will be selected automatically and applied to the next cycle. You can turn off the Dry+ option by pressing the Dry+ button.
You cannot select the Dry+ option if you select the Delicate cycle.
*Child Lock : This option allows you to lock the buttons on the control panel - 8 Dry+ / Child Lock except the Power button - so children cannot accidently start the dishwasher
by pressing the buttons on the panel. Only the Power button remains active. To lock or unlock the buttons on the control panel, press and hold the Dry+/Child Lock button for three (3) seconds.
-When the Power is On : Press and hold the "Dry+/Child Lock" button for three (3) seconds.
-When the Power is Off : Push the Power button fi rst, and then press and hold the "Dry+/Child Lock" button for three (3) seconds.
-Child Lock remains active until you turn it off. You cannot select cycles or options or start the dishwasher when Child Lock is on.
Displays cycle time and remaining hours and minutes, Delay Start hours, and Error messages.
If an error occurs during an operation, an error message is displayed with a warning sound.
Refer to the information codes page.
Child Lock indicator
-Turns on if the Child Lock is set (or the dishwasher is in the standby or pause modes).
-Turns off while the dishwasher is operating.
-When Child Lock is on, the Child Lock indicator blinks for several seconds if any button except the Power button is pressed.
9 Display | Self Clean indicator |
|
-Turns on when the Self Clean option is enabled (or the dishwasher is in the standby or pause modes), but turns off while the dishwasher is operating.
-Blinks for 5 seconds every 20 to 22 cycles.
-The cycle counter disappears when the Self Clean operation is complete or when the dishwasher reaches the 23rd cycle without the Self Clean cycle being used. (The Reset or Self Clean operation is not counted by the cycle counter.)
Rinse Refi ll indicator
-Turns on if the dishwasher runs out of rinse aid (or the dishwasher is in the standby or pause modes).
-Turns off while the dishwasher is operating.
English - 10