Dimensions and Clearances in inches | GE ZISW/B360DR instruction

*84" From Floor to Top Frame

ZISW/B360DR – GE Monogram 36" Built-In Side-by-Side Refrigerator with Dispenser and Water Filter

Dimensions and Clearances (in inches)

The Installation Space

36" Models 12"

42" Models 18"

48" Models 20"

*Finished Width

84-1/2" max

Electrical

83-1/2" min

Area

Finished

75" From Floor

Opening

to Bottom

24"

of Electrical

Area

Water Supply

3-1/2"

35"

Case Width 25-3/8

*83-1/2" at Rear

26-7/8"	36"
26-7/8"	Frame to Frame
including
handle

*Shipping height. The refrigerator can be adjusted to fit into a cutout that is 83-1/2" min. to

84-1/2" max. height Note that the top case trim at the front is 1/2" higher and will overlap upper cabinetry or soffit. Use leveling legs and wheels for a maximum 1" height adjustment.

3-1/2"

Space is the first consideration when planning the installation.

The cutout depth must be 24"

The refrigerator will project forward, slightly beyond adjacent cabinetry, depending on your installation.

Door Swing Clearances

The installation must allow for clearances to adjacent walls or cabinets. These refrigerators are equipped with a 2-position door stop. The factory-set 130° door swing can be adjusted to 90° if clearance to adjacent cabinets or walls is restricted.

The cutout depth beneath a soffit

When installed beneath a soffit, the soffit cannot exceed the 24" installation depth shown. The top case trim overlaps the bottom of the soffit.

Electrical

A 115V, 60Hz., 15 or 20 amp power supply is required. An individual properly grounded branch circuit or circuit breaker is recommended. Install a properly grounded 3-prong electrical receptacle recessed into the back wall. Electrical must be located on rear wall as shown.

130° Door Swing

90° Door Swing

23-7/8" Behind Frame

20-5/8

4" Min. to Wall

Note: GFI (ground fault interrupter) is not recommended.

Water Line

All models are equipped with an automatic icemaker. The water line can enter the opening through the floor or back wall. Route 1/4" O.D. copper tubing or GE QuickConnect kit between the cold water line and the water connection location. The copper tubing should be long enough to extend to the front of the refrigerator. The installation of an easily accessible shut-off valve in the water line is required.

Allow minimum clearances for freezer door and fresh food door for a full 130° door swing and to allow for pan removal.

•4" minimum clearance is required when door swing is adjusted to 90°. If the 90° door stop position is used, pan access is maintained, but pan removal is restricted.

•See door swing illustrations to determine interaction with adjacent cabinets or countertops.

Installation Information: Before installing, consult installation instructions packed with product, or online at Monogram.com, for current dimensional data.

Specification Revised 3/08

Listed by Underwriters Laboratories

As an Energy Star® partner, GE has determined that this product meets the Energy Star guidelines for energy efficiency.

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at GEAppliances.com or call

GE Answer Center® service, 800.626.2000.

110108

ZISW/B360DR specifications

The GE ZISW/B360DR is a sophisticated industrial transformer recently introduced by General Electric, known for its advanced features and reliable performance in power distribution applications. Designed for use in various industries, this transformer stands out due to its innovative technologies and robust characteristics.

One of the main features of the GE ZISW/B360DR is its enhanced efficiency, which significantly reduces energy losses during operation. This efficiency is achieved through optimized windings and core design, allowing it to operate effectively under varying load conditions. The transformer is built to withstand harsh environmental conditions, making it suitable for both indoor and outdoor installations.

The GE ZISW/B360DR is equipped with the latest insulation technology. This enables the transformer to maintain high dielectric strength, ensuring long-term reliability and reducing maintenance needs. The incorporation of this technology not only enhances the transformer's durability but also contributes to safety by minimizing the risk of electrical faults.

Another critical aspect of the GE ZISW/B360DR is its versatility in voltage regulation. It comes with integrated voltage control systems that allow for precise voltage adjustment, ensuring optimal operation across different operational settings. This feature is particularly beneficial in applications where voltage stability is crucial, such as in industrial plants or critical infrastructure.

The transformer also incorporates advanced monitoring and diagnostic capabilities. With built-in sensors and IoT connectivity, users can access real-time data on performance metrics, allowing for predictive maintenance and improved reliability. This innovative feature helps organizations optimize their maintenance schedules, ultimately leading to reduced operational costs and increased uptime.

In terms of environmental impact, the GE ZISW/B360DR is designed with sustainability in mind. GE has prioritized the use of eco-friendly materials and manufacturing processes, minimizing the transformer's carbon footprint. This commitment to sustainability not only complies with regulatory standards but also resonates with organizations focused on reducing their environmental impact.

Overall, the GE ZISW/B360DR combines cutting-edge technology and robust features, making it an excellent choice for industries seeking a reliable and efficient power transformer. With its advanced insulation, precise voltage regulation, monitoring capabilities, and commitment to sustainability, the transformer is poised to play a significant role in the future of industrial power management.