Framed Panel Dimensions, Dispenser Models

ZISW/B360DR – GE Monogram 36" Built-In Side-by-Side Refrigerator with Dispenser and Water Filter

1/4" Framed Panel Dimensions

If you choose to install framed panels, they must be cut to the dimensions

shown. The panels will slide into the Door frame on the door and grille.

If the custom panel is less than 1/4" thick, and it fits loosely in the door frame, it can be backed up with a piece of filler material or foam tape to improve the fit.

Important Note:

Maximum total panel weight:

•Freezer food door panel – 75 lbs.

•Freezer door panel – 52 lbs.

•Grille panel – 18 lbs.

33-7/8"

Grille Panel
Grille Panel			9"

17-13/16

Dispenser

Cutout

		68-3/8"

3-1/8"


Freezer			Fresh
	Panel		Food

14-9/16" 18-9/16"

Dispenser Cutout

5/16" Trim Reveal

1/4" Panel

Dispenser Models

These refrigerators are supplied with two dispenser trims, one for framed panels and one for overlay panels.

1/4" Framed Panel

The framed panel must be 1/4" nominal thickness to fit the dispenser trim.

•The dispenser trim fits over the custom panel and snaps into the freezer door.

•If the panel is less than 0.250" thick, a noticeable gap may be created around the dispenser trim. Foam tape may be applied on the door to improve the fit.

•If the panel is more than 0.250" thick, the dispenser trim cannot be secured to the door.

1/4"	FREEZER DOOR	0.250"
Framed		0.250"
Framed		Thick
Panel		Thick
Panel

Ice / Water Dispenser

1/4" Dispenser Trim

3/4" Overlay Panels

The overlay dispenser trim is designed to fit a total panel thickness of 1.100".

•If the panel is less than 1.100" thick, a noticeable gap may be created around the dispenser trim.

•If the panel is more than 1.100" thick, the dispenser trim cannot be secured to the door.

•The overlay panel must be constructed according to the specifications shown to achieve the correct total thickness.

•Alternative panel construction methods such as securing a

3/4" panel to a 1/4" backer panel cannot be used. Another method, routing a 3/4"-thick panel on all sides, cannot be used. These methods will not result in the required 1.100" panel thickness.

•When a raised panel design is to be used, a custom middle rail is required.

	1/4" Backer Panel		FREEZER DOOR	1.100"
	.10" Spacer			Total
	.10" Spacer			Thickness
	Panel			Thickness
15-3/8"	Panel
15-3/8"
			Ice / Water Dispenser
	3/4" Overlay
	Panel	3/4" Overlay Dispenser Trim
9-5/8"		3/4" Overlay Dispenser Trim
9-5/8"

		As an Energy Star®	For answers to your Monogram,® GE Profile™ or
	Listed by	partner, GE has determined	GE® appliance questions, visit our website at
	Underwriters	that this product meets the	GEAppliances.com or call
Specification Revised 3/08	Laboratories	Energy Star guidelines	GE Answer Center® service, 800.626.2000.
Specification Revised 3/08		for energy efficiency.	GE Answer Center® service, 800.626.2000.

110108

ZISW/B360DR specifications

The GE ZISW/B360DR is a sophisticated industrial transformer recently introduced by General Electric, known for its advanced features and reliable performance in power distribution applications. Designed for use in various industries, this transformer stands out due to its innovative technologies and robust characteristics.

One of the main features of the GE ZISW/B360DR is its enhanced efficiency, which significantly reduces energy losses during operation. This efficiency is achieved through optimized windings and core design, allowing it to operate effectively under varying load conditions. The transformer is built to withstand harsh environmental conditions, making it suitable for both indoor and outdoor installations.

The GE ZISW/B360DR is equipped with the latest insulation technology. This enables the transformer to maintain high dielectric strength, ensuring long-term reliability and reducing maintenance needs. The incorporation of this technology not only enhances the transformer's durability but also contributes to safety by minimizing the risk of electrical faults.

Another critical aspect of the GE ZISW/B360DR is its versatility in voltage regulation. It comes with integrated voltage control systems that allow for precise voltage adjustment, ensuring optimal operation across different operational settings. This feature is particularly beneficial in applications where voltage stability is crucial, such as in industrial plants or critical infrastructure.

The transformer also incorporates advanced monitoring and diagnostic capabilities. With built-in sensors and IoT connectivity, users can access real-time data on performance metrics, allowing for predictive maintenance and improved reliability. This innovative feature helps organizations optimize their maintenance schedules, ultimately leading to reduced operational costs and increased uptime.

In terms of environmental impact, the GE ZISW/B360DR is designed with sustainability in mind. GE has prioritized the use of eco-friendly materials and manufacturing processes, minimizing the transformer's carbon footprint. This commitment to sustainability not only complies with regulatory standards but also resonates with organizations focused on reducing their environmental impact.

Overall, the GE ZISW/B360DR combines cutting-edge technology and robust features, making it an excellent choice for industries seeking a reliable and efficient power transformer. With its advanced insulation, precise voltage regulation, monitoring capabilities, and commitment to sustainability, the transformer is poised to play a significant role in the future of industrial power management.