TechniSat DigitMod T1 manual Parental control blocking programmes, Changing the receiver PIN code

Page 39

Your receiver will now check whether SFI data is being received on the channel selected. This infroma- tion will be displayed along the bottom of the window.

Update time

>In the line Update time use the numeric keys to set the time at which you wish the automatic downlo- ad of SFI data to be performed.

Updating

>To download the data of the data channel, mark the line SFI Updating.

>Switch the function on by pressing OK .

If you do not wish to receive the additional data, or if you are unable to receive the data because of your location, the data reception function can also be switched off:

>Set the SFI Updating function to off, to switch off the data reception. Only the programme information provided by programme providers will then by availa- ble.

Starting download procedure manually

>To start the updating of SFI data manually, press the red function key Start now.

8.3 Parental control (blocking programmes)

Your unit is equipped with a parental control function. This means that important functions (e.g. calling up the main menu) can be protected from unauthorised manipulation. In addition, programmes and recordings that you have specifi- cally blocked can only be accessed after entering a four-digit

PIN code (unit PIN).

To work with the Parental Control menu proceed as fol- lows:

	>	Press the Menu key to display the Main Menu.
	>	Press the Menu key to display the Main Menu.	(Fig. 8-10)
	>	Use the arrow keys up/down to mark the line	(Fig. 8-10)
	>	Use the arrow keys up/down to mark the line
		Settings.
	>	Confirm by pressing OK.
		The sub-menu Settings will be displayed.
	>	Use the arrow keys up/down to mark the line
		Parental Control.
	>	Confirm by pressing OK.
		The menu Parental Control will be displayed.
		(Fig. 8-10)
	>	Use the arrow keys up/down to move the marker

withing the menu, and to change the individual posi- tions as indicated. When selecting a menu item, plea- se also note any messages displayed on the screen.

8.3.1 Changing the receiver PIN code

The receiver PIN code is set at the factory to 0000.

To change the receiver PIN code proceed as follows:

39

Image 39

Contents Operating Manual Contents Changing the basic programming Page Illustrations Remote ControlDigitMod T1 DigiPalDear customer Important notes on operation Please read this firstSafety notes When not in useHelp function Connecting the DVB-T receiver Video cassette recorder VCR ConnectionsAntenna Connection to a television setSerial interface RS Getting started initial installationMains power connection Hi-fi amplifierCountry/Time Zone Menu/OSD languageMenu/OSD language. Fig Audio languageUpdating the software Exiting from the installation assistantTime difference to GMT hours SettingsBasic settings Menu languageStand-by clock Remote control codeCountry Antenna feedVCR Scart mode Audio/Video settingsLanguage Audio signal TV Scart modeDolby Digital AC3 Antenna adjustmentSwitching on and off OperationProgramme selection Using the Programme up/down keysUsing the numeric keys Using the programme list NavigatorSelecting a list Calling up blocked programmesInformation box Dolby Digital Volume controlDolby Digital AC3 mode Selecting a different languageAdditional Programme information TV/Radio switchingReturn to last programme selected Display time and programme informationVideo text Sleep timerChannel information Freeze frameMixed mode Stop modeSub-titles SFI functions allow you to Electronic Programme Guide SFIDownloading SFI data Interrupting the downloadNow Table of current programme contents Viewing the Electronic Programme GuideNext Marking a programme MoreSFI Functions SFI InformationSFI Programme overview SFI Timer programmingRecording a programme timer operation Delete timer operationCategories SFI overview by programme type categoryProgrammes Displaying SFI overview for other programmesTimer recording Manual timer programmingExiting SFI Stop SourceDate StartProgramming a new timer event Timer overviewChanging timer programming Deleting timer programmingConfiguring the Favourites list Changing the basic programmingCalling up the Navigator Programme List Manager Add Adding programmes to the Favourites listUse the arrow keys right/left to mark Yes or No Marking blocks of programmes Sort Programming the electronic programme guide Deleting from the Total list Sorting programmesProgramme Guide Selecting a channelGenres Start categorySFI Channel OverviewParental Control Starting download procedure manuallyParental control blocking programmes Changing the receiver PIN codeMode Selecting a programmeChange Receiver PIN Automatic Scan Programme search scanChannel scan Scan ModeExpanded Scan Frequency scanSorted Manual ScanAfter the scan PID scanService settings Activating default factory settingDelete all programmes Use the arrow keys left/right to select Yes or Abort Copying settingsSoftware update Updating SoftwareTechnical terms System configurationReceiver Technical dataSignal DVB-T receiverAudio parameters Output analogue DemultiplexingVideo decoding Audio decodingPower supply Mains adapter Power consumption DigiPal TimerRemote control system Optional remote controlProblem Possible cause Solution Trouble-shooting guidePage Page AC3 IndexVolume control Switching on and offProgramme selection Using the programme up/down keys Using the programme list