GE ZISP420DTSS instruction

ZISP420DTSS

GE Monogram® 42" Built-In Professional Side-by-Side Refrigerator with Dispenser and Water Filter

Dimensions and Installation Information (in inches)

The Installation Space

41"

Case Width

*83-1/2"

Rear

25-3/4" Case Depth

*84" from

Floor to

Top Frame

42" Frame to Frame Width

*Shipping height. The refrigerator can be adjusted to fit into a cutout that is 83-1/2" min. to

84-1/2” max. height. Note that the top case trim at the front is 1/2" higher and will overlap upper cabinetry or soffit. Use leveling legs and wheels for a maximum 1" height adjustment.

36" Models 12"

42" Models 18"

48" Models 20"

*Finished Width

84-1/2" max

Electrical

83-1/2" min

Area

Finished

75" From Floor

Opening

to Bottom

24"

of Electrical

Area

Water Supply

3-1/2"

28-11/16" Depth Including Handles

Product Clearances

These refrigerators are equipped with a 2 position door stop. The factory set 130° door swing can be adjusted to 90° if clearance to adjacent cabinets or walls is restricted.

3-1/2"

Water and electrical locations

The opening must be prepared with the electrical and water supply located as shown.

130° Door Swing

13"

19"

90° Door Swing

23-7/8" Behind Frame

26-5/8"

5" Min. to Wall

The cutout depth must be 24".

The refrigerator will project forward, slightly beyond adjacent cabinetry, depending on your installation.

The cutout depth beneath a soffit:

When installed beneath a soffit, the soffit cannot exceed the 24" installation depth shown. The top case trim overlaps the bottom of the soffit.

Frameless cabinets:

The case trim overlaps cabinets at the top and sides. Therefore, frameless cabinets may require filler strips to

Allow minimum clearances for freezer door and fresh food door for a full 130° door swing and to allow for pan removal.

5" minimum clearance is required when door swing is adjusted to 90°. If the 90° door stop position is used, pan access is maintained, but pan removal is restricted.

Installation Information: Before installing, consult installation instructions packed with product, or online at Monogram.com, for current dimensional data.

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

prevent interference with cabinet door swing. The opening must allow for filler strips.

Additional Specifications

•A 115 volt 60Hz., 15 or 20 amp power supply is required. An individual properly grounded branch circuit or circuit breaker is recommended. Install a properly grounded 3- prong electrical receptacle recessed into the back wall. Electrical must be located on rear wall as shown.

Note: GFI (ground fault interrupter) is not recommended.

•Water line can enter the opening through the floor or back wall. The water line should be 1/4" O.D. copper tubing or GE SmartConnect™ kit between the cold water line and water connection location, long enough to extend to the front of the refrigerator. Installation of an easily accessible shut off valve in the water line is recommended.

Listed by		As an Energy Star®
		partner, GE has determined
Underwriters
		that this product meets the
Laboratories
		Energy Star guidelines

		for energy efficiency.

Specification Revised 3/08

110188

ZISP420DTSS specifications

The GE ZISP420DTSS is a cutting-edge industrial vertical pump renowned for its reliability and efficiency in demanding applications. Designed primarily for water and wastewater management, it exhibits characteristics that make it a standout choice for various industrial sectors, including manufacturing, agricultural, and municipal services.

One of the main features of the ZISP420DTSS is its robust construction, which includes high-quality stainless steel that enhances durability and resistance to corrosion. This is particularly beneficial in environments where chemical exposure is a concern. The pump is designed to handle a wide range of fluids, making it versatile for numerous applications, from handling clean water to more challenging slurries and wastewater.

The GE ZISP420DTSS incorporates advanced hydraulic technologies that provide superior flow rates and efficiency. Its innovative impeller design minimizes turbulence, allowing for smooth operation and reduced wear over time. The pump's high efficiency also translates into lower energy consumption, making it a cost-effective choice for businesses looking to optimize their operational expenditures.

In addition, the pump features a state-of-the-art seal assembly that prevents leakage and minimizes maintenance requirements. This component not only extends the lifespan of the pump but also enhances the safety and cleanliness of the operating environment. The ZISP420DTSS is equipped with customizable configurations, allowing users to select materials and designs that fit their specific needs and ensure compatibility with the intended application.

Moreover, the GE ZISP420DTSS is designed for easy installation and maintenance. Its user-friendly features make it accessible for technicians and engineers, reducing downtime and ensuring that systems remain operational without extensive disruptions. The integration of smart technologies allows for real-time monitoring and diagnostics, further facilitating maintenance planning and efficiency improvements.

The combination of its robust build quality, advanced hydraulic performance, and ease of maintenance establishes the GE ZISP420DTSS as a leading solution for industries requiring reliable pumping systems. In a landscape where efficiency and reliability are paramount, the ZISP420DTSS stands out as an invaluable asset, delivering exceptional performance tailored to meet the evolving demands of industrial applications.