Remove packaging
Controls and Features
Beverage Center
Before using, be sure all packing materials | If you are discarding an old refrigerator, |
and tape have been removed. | remove the doors to reduce the danger of |
| children being trapped inside. |
Temperature control
The temperature range of the beverage center is from the mid thirties to the upper forties.
Do not install the beverage center where the temperature will go below 55°F (13°C) or above 90°F (32°C).
As with any refrigeration product, there is a slight temperature variance at different locations within the cabinet.
The coolest area will be in the lower part of the cabinet.
The cooler area will be in the middle section.
The upper part of the cabinet is the warmest section.
To set the control, turn it to the midpoint setting (approximately 45ºF). Once the beverage center is loaded, allow at least
24 hours before making any adjustments to the initial setting.
Interior light and switch
The interior light makes it easy to view | When the switch is in the OFF position, |
your beverage labels and enhances the | the light comes on only when the door is |
display of your collection. | opened. Remember to turn off the light |
| when it is no longer needed. |
9