GE ZFSB23D SS Tools Required Flooring, Materials Required, Grounding the Refrigerator

	Installation Instructions
TOOLS REQUIRED	FLOORING
¥ Tinsnips to cut banding	For proper installation, this refrigerator must be placed
¥ Stepladder	on a level surface of hard material that is at the same
¥ Bucket	height as the rest of the flooring. This surface should be
¥ Level	strong enough to support a fully loaded refrigerator.
¥ Appliance Hand Truck
¥ Tubing cutter	IMPORTANT NOTE: Protect the finish of the flooring.
¥ #2 Phillips screwdriver	Cut a large section of the cardboard carton and place
¥ Drill and appropriate bits	under the refrigerator where you are working.
¥ 3/8", 5/16" and 7/16" socket
¥ Safety glasses

MATERIALS REQUIRED

• 1/4 O.D. compression nut and 2 ferrules (sleeves)

GROUNDING THE REFRIGERATOR

IMPORTANT - (Please read carefully)

FOR PERSONAL SAFETY, THIS APPLIANCE MUST BE PROPERLY GROUNDED.

The power cord of this appliance is equipped with a three-prong (grounding) plug which mates with a standard three-prong (grounding) wall receptacle to minimize the possibility of electric shock hazard from this appliance.

Have the wall outlet and circuit checked by a quali- fied electrician to make sure the outlet is properly grounded.

Where a standard 2-prong wall outlet is encountered, it is your personal responsibility and obligation to

have it replaced with a properly grounded 3-prong wall outlet.

DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE THIRD (GROUND) PRONG FROM THE POWER CORD.

DO NOT USE AN ADAPTER PLUG TO CONNECT THE REFRIGERATOR TO A 2-PRONG OUTLET.

DO NOT USE AN EXTENSION CORD WITH THIS APPLIANCE.

4