GE ZFSB23D SS installation instructions Start Icemaker, Temperature Controls, Install Toekick

Page 9

Installation Instructions

STEP 8 START ICEMAKER

Power Switch

Feeler Arm

¥Flip the switch to I (ON) position. The icemaker will not begin to operate until it reaches its operat- ing temperature of 15°F (-9°C)or below. It will then begin operation automatically. It will take 2 to 3 days to fill the ice bin.

¥Be sure nothing interferes with the sweep of the feeler arm. Do not place objects in the path of the feeler arm.

¥Discard the first full bucket of ice cubes.

¥To turn the icemaker off, set the switch to O (OFF).

STEP 9 TEMPERATURE

CONTROLS

¥The temperature controls are preset at 37° for the refrigerator and 0°F for the freezer.

¥Allow 24 hours to stabilize before making adjustments.

STEP 10 INSTALL TOEKICK

¥Press toekick into position and reinstall one screw on each side.

Toekick Screw

Important: The vented toekick must remain unob- structed for proper air circulation.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Installation Instructions Before YOU Begin ContentsInstallation Space Product Dimensions ClearancesInstallation in a corner Air Circulation ClearancesMaterials Required Tools Required FlooringGrounding the Refrigerator Important Please read carefullyMove Refrigerator Indoors Shut off the main water supply Install Water LineIf you are using copper tubing Connect PowerIf you are using GE SmartConnect tubing Connect Water SupplyLevel Refrigerator Rollers at the rear can also be adjustedLevel the Doors Rollers have three purposesTemperature Controls Install ToekickStart Icemaker Page Page Pub. No Dwg. No D5335P001
Top Page Image Contents