Peavey operation manual Transtube 258 EFX Especificaciones, Power @ Clipping Typically

Page 26

TRANSTUBE® 258 EFX ESPECIFICACIONES

POWER AMP SECTION:

Nominal Levels are with

20 mW into 8 Ohms

 

Nominal Gain @ 5

(Stereo jacks, monaural

Rated Power and Load:

Minimum Levels are with

signal disconnects internal

25 W RMS into 8 Ohms

Minimum Gain @ 10

speaker when phone plug is

 

All effects “OFF”

inserted.)

Power @ Clipping (Typically):

 

 

(5% THD, 1 kHz, 120 V AC

Preamp Input (Normal

System Hum and Noise @

line)

Channel):

Nominal Input Level:

25 W RMS into 8 Ohms

Impedance: High Z, 1 M Ohm

(20 Hz to 20 kHz unweighted)

 

Nominal Input Level: -6 dBV,

62 dB below rated power

Total Harmonic Distortion:

70 mV RMS

 

Less than 0.5%m 100 mW to

Maximum Input Level: 0 dBV,

Equalization:

10 W RMS, 60 Hz to 10 kHz,

1 V RMS

Special low, mid, and high

8 W (typically below 0.2%)

 

passive type EQ

 

CD/TAPE INPUT:

 

Power Consumption:

50 W, 50/60 Hz, 120 V AC

PREAMP SECTION:

The following specs are measured

@2 kHz with the controls preset as follows:

Input Impedance: 100 k Ohms Nominal Input Level:

.5 V RMS, -6 dBV (Stereo jack designed for use with stereo headphone outputs on CD/tape players)

Channel Select Normal (Out)

Headphone Output:

Low and High @ 10

Load Impedance:

Mid @ 0

8 Ohms or greater

Pre Gain and Post Gain @ 10

Nominal Power Output:

Reverb @ 0

 

Specifications are subject to change without notice.

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Page Page Important Safety Instructions 258 EFX FeaturesTranstube 258 EFX Features and Controls Front Panel VolumeMODERN/VINTAGE Switch InputMode Select EFX AdjustFootswitch not Included EFX Select ModePreset Select Mode Tweak ADJ Parameters Tweak FeaturesCreating and Storing a Custom Preset Recommended Settings Power AMP Section Transtube 258 EFX Block DiagramTranstube 258 EFX Specifications Preamp SectionFrançais Caracteristiques ET Controles Panneau ArrierePanneau Avant Pedalier NON Inclu Mode EFX Select Trucs ET Astuces Parametres SecondairesSpecifications DU Transtube 258 EFX Español CaracterísticasControles Y Características Entrada VolumenPanel Frontal PRE GananciaPedalera no incluida Ajuste DE EFX efectosReverb Cámara Selección DE ModoModo DE Selección DE Presets Parametros DE Ajuste DE Cambios Creando Y Salvando UN Preset DE UsuarioPage Preamp Input Normal System Hum and Noise @ Power @ Clipping TypicallyTranstube 258 EFX Especificaciones Channel Nominal Input LevelDeutsch MerkmaleFunktionen UND Regler 11 LOW, MID UND High EQ VorderseiteMODERN/VINTAGE-SCHALTER Active CHANNEL-LEDsFussschalter Nicht Beiliegend Mode Select EFX ADJ-PARAMETERPreset SELECT-MODUS EFX SELECT-MODUSTweak ADJ-PARAMETER Erstellen UND Speichern Persönlicher PresetsFunktionen ZUR Feineinstellung Tweaks Page Technische Daten DES Transtube 258 EFX VerstärkerstufePeavey Electronics Corporation Limited Warranty 80304910

258 EFX specifications

The Peavey 258 EFX is a versatile and reliable audio mixer designed for both live sound and studio applications. With its impressive array of features, this mixer is an excellent choice for musicians, audio engineers, and event organizers seeking quality sound reinforcement in a compact and user-friendly package.

One of the standout features of the Peavey 258 EFX is its configuration, which includes 8 input channels, allowing for multiple audio sources to be mixed simultaneously. Each channel is equipped with a three-band EQ, which enables users to fine-tune their sound, ensuring clarity and balance across all frequencies. The mixer also includes two auxiliary sends, which provide flexible routing options for effects and monitor mixes.

A key highlight of the 258 EFX is its built-in digital effects processor. This feature offers 16 different effects, such as reverb, delay, and chorus, all of which can be applied to individual channels or the overall mix. This built-in processing eliminates the need for additional external gear, making it an ideal choice for users seeking a streamlined setup.

In terms of connectivity, the Peavey 258 EFX boasts a variety of input and output options. It features XLR and 1/4-inch TRS inputs, which accommodate both microphone and line-level sources. Additionally, the mixer includes stereo RCA inputs and a headphone output, providing further flexibility for connecting various audio devices.

Another essential aspect of the Peavey 258 EFX is its sturdy construction. Built to withstand the rigors of live performance, the mixer features a rugged chassis and high-quality components that ensure longevity and reliability. It is lightweight and portable, making it easy for musicians and sound engineers to transport to gigs and events.

Furthermore, the Peavey 258 EFX is designed with user-friendliness in mind. The intuitive layout of controls and indicators allows for quick adjustments during performances, minimizing the need for extensive sound checks. Users can easily navigate the mixer, making it accessible to both beginners and experienced professionals.

In conclusion, the Peavey 258 EFX is an exceptional audio mixer that combines a compact design with powerful features. With its versatile input options, built-in effects, and robust construction, it serves as a reliable tool for achieving high-quality sound in various applications. Whether for live performances, rehearsals, or studio recordings, the Peavey 258 EFX stands out as a solid choice for audio enthusiasts.
Top Page Image Contents