Peavey 258 EFX Tweak Features, Tweak ADJ Parameters, Creating and Storing a Custom Preset

Page 9

TWEAK FEATURES

EFX amplifiers offer hidden features to further adjust the parameters of the digital effects. In addition to the adjustments described in the EFX ADJ PARAMETERS section of this manual, additional tweaks may be made to customize effects to user preference. Tweaks are made by pressing and holding the EFX ADJUST (14) control while simultaneously rotating the REVERB (15) control.

The EFX ADJUST control must be pressed for at least one second to enter Tweak Mode. Reverb setting will not be affected while in Tweak Mode. The LED ring surrounding the control will now reflect the value of the effect being tweaked. As in standard parameter changes, the effect being tweaked will be the active effect as indicated by the LED adjacent to the effect name.

TWEAK ADJ PARAMETERS

 

 

Tremolo - Intensity

Funk Wah - Decay time

Phaser - Depth

Flanger - Depth

Rotary Speaker - Wet/Dry mix

Chorus - Wet/Dry mix

To recover the factory settings for both Standard and Tweak Modes, press the EFX ADJUST (14) control and hold for one second to enter Tweak Mode, then press the DELAY (16) control.

CREATING AND STORING A CUSTOM PRESET

The following steps explain the creation and storage of two different effects/settings, as well as two different settings for Delay/Reverb. The Flanger and Octaver effects were selected at random. These steps will accomplish custom presets using any of the effects.

1.Assure the footswitch is in the EFX Select Mode by pressing the MODE SWITCH (17) if necessary. The MODE LED (18) will illuminate.

2.Use PRESET 1 (19) to select Lead or Clean channel. The CHANNEL LED (20) will illuminate for Lead channel.

3.Select the position of PRESET 2 (22). The MODULATION LED (21) may be illuminated or dark at the discretion of the user.

4.Select Flanger and adjust rate to preference using the EFX ADJUST (14) control on the front panel (standard adjustment).

5.Press and hold the EFX ADJUST (14) control while adjusting Flanger depth to preference with the REVERB (15) control on the front panel (tweak).

6.Press PRESET 2 (22) to change to the other Modulation position.The MODULATION LED

(21)will illuminate or go dark depending on its status in step 5.

7.Select Octaver and adjust wet/dry mix to preference using the EFX ADJUST (14) control on the front panel (standard adjustment).

8.Select the position of PRESET 3 (24). The DELAY/REVERB LED (23) may be illuminated or dark at the discretion of the user.

9.Adjust reverb to preference using the REVERB (15) control on the front panel.

10.Press PRESET 3 (24) to change to the other Delay/Reverb position. The DELAY/REVERB LED (23) will illuminate or go dark depending on its status in step 10.

11.Adjust delay type, time, and volume to preference using the DELAY (16) control.

12.Set the position of PRESET 2 (22) and PRESET 3 (24) to the settings preferred as defaults. (Default setting is the one that is active when the preset is selected.)

13.Press the MODE SWITCH (17) to return to the Preset Mode.

14.Double-click PRESET 1, 2, or 3 (19, 22, or 24) to store the settings in that location.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Page Page Important Safety Instructions Features Transtube 258 EFX258 EFX Features and Controls MODERN/VINTAGE Switch VolumeFront Panel InputFootswitch not Included EFX AdjustMode Select EFX Select ModePreset Select Mode Tweak Features Creating and Storing a Custom PresetTweak ADJ Parameters Recommended Settings Transtube 258 EFX Specifications Transtube 258 EFX Block DiagramPower AMP Section Preamp SectionFrançais Panneau Arriere Caracteristiques ET ControlesPanneau Avant Pedalier NON Inclu Mode EFX Select Parametres Secondaires Trucs ET AstucesSpecifications DU Transtube 258 EFX Características EspañolControles Y Características Panel Frontal VolumenEntrada PRE GananciaReverb Cámara Ajuste DE EFX efectosPedalera no incluida Selección DE ModoModo DE Selección DE Presets Creando Y Salvando UN Preset DE Usuario Parametros DE Ajuste DE CambiosPage Transtube 258 EFX Especificaciones Power @ Clipping TypicallyPreamp Input Normal System Hum and Noise @ Channel Nominal Input LevelMerkmale DeutschFunktionen UND Regler MODERN/VINTAGE-SCHALTER Vorderseite11 LOW, MID UND High EQ Active CHANNEL-LEDsEFX ADJ-PARAMETER Fussschalter Nicht Beiliegend Mode SelectEFX SELECT-MODUS Preset SELECT-MODUSErstellen UND Speichern Persönlicher Presets Funktionen ZUR Feineinstellung TweaksTweak ADJ-PARAMETER Page Verstärkerstufe Technische Daten DES Transtube 258 EFXPeavey Electronics Corporation Limited Warranty 80304910

258 EFX specifications

The Peavey 258 EFX is a versatile and reliable audio mixer designed for both live sound and studio applications. With its impressive array of features, this mixer is an excellent choice for musicians, audio engineers, and event organizers seeking quality sound reinforcement in a compact and user-friendly package.

One of the standout features of the Peavey 258 EFX is its configuration, which includes 8 input channels, allowing for multiple audio sources to be mixed simultaneously. Each channel is equipped with a three-band EQ, which enables users to fine-tune their sound, ensuring clarity and balance across all frequencies. The mixer also includes two auxiliary sends, which provide flexible routing options for effects and monitor mixes.

A key highlight of the 258 EFX is its built-in digital effects processor. This feature offers 16 different effects, such as reverb, delay, and chorus, all of which can be applied to individual channels or the overall mix. This built-in processing eliminates the need for additional external gear, making it an ideal choice for users seeking a streamlined setup.

In terms of connectivity, the Peavey 258 EFX boasts a variety of input and output options. It features XLR and 1/4-inch TRS inputs, which accommodate both microphone and line-level sources. Additionally, the mixer includes stereo RCA inputs and a headphone output, providing further flexibility for connecting various audio devices.

Another essential aspect of the Peavey 258 EFX is its sturdy construction. Built to withstand the rigors of live performance, the mixer features a rugged chassis and high-quality components that ensure longevity and reliability. It is lightweight and portable, making it easy for musicians and sound engineers to transport to gigs and events.

Furthermore, the Peavey 258 EFX is designed with user-friendliness in mind. The intuitive layout of controls and indicators allows for quick adjustments during performances, minimizing the need for extensive sound checks. Users can easily navigate the mixer, making it accessible to both beginners and experienced professionals.

In conclusion, the Peavey 258 EFX is an exceptional audio mixer that combines a compact design with powerful features. With its versatile input options, built-in effects, and robust construction, it serves as a reliable tool for achieving high-quality sound in various applications. Whether for live performances, rehearsals, or studio recordings, the Peavey 258 EFX stands out as a solid choice for audio enthusiasts.
Top Page Image Contents