GE PCR06WATSS, PCR06BATSS Controls and features-Wine Chiller, Safety, Inserting Wine Bottles

Page 5

Controls and features—Wine Chiller.

ge.com

Safety

Temperature Control

The temperature range of the wine chiller is from the low forties to the mid sixties. This appliance is not a refrigerator and does not maintain temperatures like a refrigerator (below 41°F ).

Do not install the wine chiller where the temperature will go below 55°F (13°C) or above 90°F (32°C).

The RED WINE setting will provide a temperature of approximately 55ºF (13ºC), which is the optimum storage temperature for red wine.

The WHITE WINE setting will provide a temperature of approximately 45ºF (7ºC), which is the optimum serving temperature for white wine.

As with any refrigeration-type product, there is

a slight temperature variance at different locations within the cabinet.

Temperatures at the bottom of the cabinet will be cooler than temperatures at the top of the cabinet.

Position your wine inventory accordingly (i.e. white wines in the cooler zones and red in the warmer zones).

To set the control, turn it to the RED WINE setting. Once the bottles are loaded, allow at least 24 hours before making any adjustments to the initial setting.

NOTE: This unit is designed for storing and cooling beverages. It is not intended for the storage of perishable foods.

Suggested storing and serving temperatures for wine

If you plan to drink the wine in less than

2 months, use the appropriate red or white setting based on the wine type.

If you plan to store the wine for more than

2 months, use the storing and serving guide below.

 

Red Wine

White Wine

Storing

55°F (13°C)

55°F (13°C)

 

 

 

Serving

Room Temperature

 

 

65°F to 72°F

45°F to 55°F

 

(18°C to 22°C)

(7°C to 13°C)

 

 

 

Instructions

 

Operating Instructions

 

Care and Cleaning

8 bottle arrangement

9 bottle arrangement

Inserting Wine Bottles

The top five full extension drawers each hold eight bottles, two deep with the necks alternating front to back or nine bottles, alternating with necks pointing inward.

The bottom two full extension drawers hold

six bottles each and are loaded with necks facing the rear. Tall bottles should not be loaded on the bottom drawer because they may prevent the door from closing.

Instructions

Installation

 

 

Bottom two drawers

Loading Tips and Suggestions

Troubleshooting Tips

The bottles on the top full extension drawer, directly under the light, will be exposed to a slightly higher temperature when the light is on. Position your wines accordingly and remember to turn off the light when it is no longer needed.

Keep wines that you plan to use for everyday drinking and entertaining on the front half of the full extension drawers where labels are completely visible. Place wines for aging or longer term storage in the rear.

Do not allow children to climb, stand or hang on the wine chiller full extension drawers. They could seriously injure themselves and possibly cause damage to the wine chiller.

5

Consumer Support

Image 5
Contents Et d’installation Operating Instructions InstallationInstallation Instructions Manual del Troubleshooting TipsOperating Instructions Care and CleaningTips Consumer Support InstructionsCare and Cleaning TroubleshootingInstallation Instructions Controls and features-Beverage CenterTips Support ConsumerSafety Controls and features-Wine ChillerLoading Tips and Suggestions Troubleshooting Tips Inserting Wine BottlesSafety Controls and features-Beverage Center and Wine ChillerInterior Light and Switch Removing Full Extension DrawersInstructions Operating Care and cleaningProduct Clearances When installed in a cornerRead these instructions completely and carefully Choose the locationSIDE-BY-SIDE Installations Installation SpaceAdditional Specifications Cutout depth should be 24″Parts Supplied Tools RequiredGrounding the Beverage Center and Wine Chiller Staining Wood Drawer FrontsReverse Door Swing SET Temperature Controls Connect PowerLevel Slide Product Into the CutoutFans come on in order to cool the appliance Normal operating soundsOperating Installation Instructions Before you call for service…Safety Instructions Ge.com Care and Cleaning Operating Instructions Safety Instructions Consumer Support Troubleshooting TipsGeneral Electric Company GE Service Protection PlusConsumer Product Ownership Registration Safety Instructions Instructions InstallationCleaning CareWhat Mabe Will Not Cover Mabe Will ReplaceConsommateur Soutien au Mode d’emploiLa section Française ’emploi ’entreposez pas ou n’installez pas l’appareil à l’extérieurSoutien au Consommateur Agent de refroidissementBranchement Électrique ’installation Instructions Conseils de dépannageConsommateur Commandes et caractéristiques-Refroidisseur de boissonsInstructions ’installation Service ’installation InstructionsChargement des bouteilles de vin Vin rouge Vin blancLumière intérieure et interrupteur Façades de tiroir en boisPour retirer Pour remplacerEntretien et nettoyage ’installation InstructionsChoix de l’emplacement Si installé dans un coinDégagement Requis Pour Ouverture DE Porte Lisez attentivement et soigneusement ces instructionsInstallation Côte À Côte Espace Pour InstallationLa dimension d’encastrement doit être de 61 cm 24 po Caractéristiques supplémentairesPièces Fournies Outils NécessairesTeindre LES Façade EN Bois DES Tiroirs DéballageInversion DU Battant DE Porte Branchement DE L’APPAREIL Mise À NiveauSons normaux de fonctionnement Entretien et nettoyage ’installation InstructionsTemps chaud ou ouvertures Avant d’appeler le service de dépannage…De porte fréquentes La porte est laissée ouverteAppliquez une couche mince de paraffine ou de Conseils de dépannage Instructions d’installation Entretien et Nettoyage Mode d’emploi Consignes de SécuritéOwnership Registration Page Mode d’emploi Ce que GE ne couvre pas Pour la période de GE remplaceraPerte de vin à cause de la détérioration Défectueuse du système scellé de refroidissementProlongation de garantie Soutien au consommateur Service de réparations800.361.3400 Visitez notre site Web ou appelez-nous auLa sección en Español Problemas SolucionarConsejos para la solución Soporte al consumidorNo almacene o instale este aparato en el exterior RefrigerantesAntes de desechar su antiguo refrigerador Guarde Estas Instrucciones Limpieza Operación Controles y funciones Centro de bebidasControl de temperatura Estantes de cristalInserción de botellas de vino Controles y funciones Refrigerador de vinoAlmacenar ServirQuitar los cajones de extensión completa Cuidado y limpiezaLuz interior e interruptor Para quitar los cajonesCuidado y limpieza Lea estas instrucciones en su totalidad y con atención Tolerancias DEL ProductoCuando se instale en una esquina Elija la ubicaciónInstalaciones Conjuntas EL Espacio DE InstalaciónUna instalación conjunta requiere una apertura de al La profundidad de sección debe ser de 61 cm 24″Partes Suministradas Herramientas NecesariasQuitar EL Embalaje Destornillador Philips número Llave inglesaInvertir EL Sentido DE Apertura DE LA Puerta Conectar LA Alimentación NivelarDeslizar EL Producto Hacia EL Hueco Definir Controles DE TemperaturaWhoosh Sonidos de funcionamiento normalesCuidado y Antes de llamar para solicitar servicio técnico…Se crea humedad en Notas Notas Notas Por el período de GE reemplazará Garantía del centro de bebidas o refrigerador de vinoLo que GE no cubrirá Partes defectuosasLo que Mabe no cubrirá Por el período de Mabe reemplazaráEn Canadá geappliances.ca Soporte al consumidorU.S. ge.com Consumer SupportCanada, call

PCR06WATSS, PCR06BATSS specifications

The GE PCR06BATSS and PCR06WATSS are advanced refrigerators designed to enhance the modern kitchen experience with their cutting-edge features and technologies. Both models belong to GE’s Profile series, known for their high efficiency, innovative designs, and user-friendly functionalities.

One of the standout features of the GE PCR06BATSS is its ability to provide superior cooling performance while minimizing energy consumption. This model is equipped with a robust inverter compressor that adjusts the cooling levels based on the needs of the contents inside, ensuring consistent temperatures while using less energy. This not only promotes sustainability but also translates to cost savings for consumers.

The design of the PCR06BATSS incorporates a sleek stainless steel finish that adds a contemporary edge to any kitchen decor. The unit's external water and ice dispenser offers convenience without compromising on style. Users can enjoy fresh, filtered water and ice cubes directly from the refrigerator door, making it an ideal choice for families and entertainers alike.

In contrast, the GE PCR06WATSS features a beautiful white exterior that seamlessly blends into various kitchen styles. This refrigerator also shares the advanced cooling technology found in its counterpart, ensuring that food remains fresh for longer periods. Both models include adjustable shelving, providing flexibility for organizing food items according to individual needs.

Integrated smart technology is another common trait of these GE models. They can be easily connected to Wi-Fi, allowing users to monitor and control settings remotely through their smartphones. Notifications about temperature fluctuations or filter replacement can enhance user convenience and offer peace of mind.

Moreover, both the PCR06BATSS and PCR06WATSS are designed with an efficient airflow system, promoting even cooling in all compartments. Humidity-controlled crisper drawers help keep fruits and vegetables fresh, preserving their texture and taste.

In summary, the GE PCR06BATSS and PCR06WATSS represent the perfect marriage of style, convenience, and technology. With features that promote energy efficiency, advanced cooling systems, and easy access to water and ice, these refrigerators are excellent choices for the modern household looking for reliability and performance. Whether selecting the stainless steel or white finish, consumers can enjoy enhanced functionality and aesthetic appeal that elevate their kitchen experience.