Care and cleaning, Instructions Operating | GE PCR06WATSS specification

GE PCR06WATSS, PCR06BATSS installation instructions Care and cleaning, Instructions Operating

Care and cleaning.

ge.com

Safety

Cleaning the Outside

IMPORTANT: Unplug the beverage center or wine chiller before cleaning.

Keep the outside clean. The cabinet can be washed with mild soap and water. Rinse thoroughly with clean water. Never use abrasive scouring powders.

Use a glass cleaner or mild soap and water and a soft cloth to clean the glass door. Do not use any abrasive powders.

Wipe the controls with a damp cloth. Dry thoroughly. Do not use cleaning sprays, large amounts of soap and water, abrasives or sharp objects on the panel—they can damage it. Some paper towels can also scratch the control panel.

Do not wipe the beverage center or wine chiller with a soiled dishcloth or towel.

These may leave a residue that can

erode the paint. Do not use scouring pads, powdered cleaners, bleach or cleaners containing bleach because these products can scratch and weaken the paint finish.

Stainless steel. Regularly clean and polish the stainless steel areas (on some models) with a commercially available stainless steel cleaner such as Stainless Steel Magic® to preserve and protect the fine finish. Stainless Steel Magic® is available through GE Parts and Accessories, 800.626.2002, or ge.com. Order part number WX10X15.

Do not use appliance wax or polish on the stainless steel.

Instructions

Operating

Care and

Cleaning the Inside

IMPORTANT: Unplug the beverage center or wine chiller before cleaning.

The vinyl door gasket may be cleaned with mild soap and water or a baking soda solution. Rinse well.

After cleaning the door gasket, apply a thin layer of paraffin wax or petroleum jelly to the door gasket at the hinge side. This helps keep the gasket from sticking and bending out of shape.

Use a slightly damp cloth or sponge when cleaning around switches, lights or controls.

Use warm water and baking soda solution— about a tablespoon (15 ml) of baking soda to a quart (1 liter) of water. This both cleans

and neutralizes odors. Thoroughly rinse and wipe dry.

Other parts of the beverage center or wine chiller unit—including the full extension drawers and glass shelves—can be cleaned the same way.

Avoid cleaning cold glass shelves with hot water because the extreme temperature difference may cause them to break. Handle glass shelves carefully. Rough handling of tempered glass can cause it to shatter.

Do not use detergents, scouring powders, spray cleaners or other harsh chemicals to clean the interior.

Installation

Cleaning

Instructions

Drain hole

Drain Hole

Periodically check the drain hole and channel for any debris. If the drain is blocked, condensation will not drain properly.

To check and clean the drain hole, remove the bottom two glass shelves or bottom two full extension drawers. Sweep a damp cloth along the channel in the back of the beverage center. Use a finger to sweep away any debris from the drain hole.

Troubleshooting Tips

Light Bulb Replacement

Unplug the beverage center or wine chiller	To remove the light shield, push in the tab on
before replacing the light bulb.	the left side of the shield and lower it. Replace
	with a 15 watt appliance bulb.

In the Event of a Power Failure

If the power fails, open the door as	Do not store or use gasoline or other
infrequently as possible to maintain	flammable vapors and liquids in the vicinity
the temperature.	of this or any other appliance.	7

Consumer Support

PCR06WATSS, PCR06BATSS specifications

The GE PCR06BATSS and PCR06WATSS are advanced refrigerators designed to enhance the modern kitchen experience with their cutting-edge features and technologies. Both models belong to GE’s Profile series, known for their high efficiency, innovative designs, and user-friendly functionalities.

One of the standout features of the GE PCR06BATSS is its ability to provide superior cooling performance while minimizing energy consumption. This model is equipped with a robust inverter compressor that adjusts the cooling levels based on the needs of the contents inside, ensuring consistent temperatures while using less energy. This not only promotes sustainability but also translates to cost savings for consumers.

The design of the PCR06BATSS incorporates a sleek stainless steel finish that adds a contemporary edge to any kitchen decor. The unit's external water and ice dispenser offers convenience without compromising on style. Users can enjoy fresh, filtered water and ice cubes directly from the refrigerator door, making it an ideal choice for families and entertainers alike.

In contrast, the GE PCR06WATSS features a beautiful white exterior that seamlessly blends into various kitchen styles. This refrigerator also shares the advanced cooling technology found in its counterpart, ensuring that food remains fresh for longer periods. Both models include adjustable shelving, providing flexibility for organizing food items according to individual needs.

Integrated smart technology is another common trait of these GE models. They can be easily connected to Wi-Fi, allowing users to monitor and control settings remotely through their smartphones. Notifications about temperature fluctuations or filter replacement can enhance user convenience and offer peace of mind.

Moreover, both the PCR06BATSS and PCR06WATSS are designed with an efficient airflow system, promoting even cooling in all compartments. Humidity-controlled crisper drawers help keep fruits and vegetables fresh, preserving their texture and taste.

In summary, the GE PCR06BATSS and PCR06WATSS represent the perfect marriage of style, convenience, and technology. With features that promote energy efficiency, advanced cooling systems, and easy access to water and ice, these refrigerators are excellent choices for the modern household looking for reliability and performance. Whether selecting the stainless steel or white finish, consumers can enjoy enhanced functionality and aesthetic appeal that elevate their kitchen experience.