Philips MC120 manual Basic Functions, Switching the system on, Adjusting volume and sound, Source

Basic Functions

STANDBY-ON	PROGRAM	TIMER	RDS	REPEAT	SHUFFLE
	ON		CLOCK	BAND
	OFF
	PROGRAM
	SOURCE
	SELECT
PLAY•PAUSE		STOP
PREV	NEXT	iR

IMPORTANT:

Before you operate the system, complete the preparation procedures.

Switching the system on

●	Press 2 STANDBY ON or SELECT
	SOURCE.
	➜ The system will switch to the last selected
	source.
●	Press CD, TUNER, TAPE or AUX on the

Adjusting volume and sound

1Turn the VOLUME control anti-clockwise to

decrease or clockwise to increase volume on the system (or press VOL -/+on the remote

control).

➜Display shows the volume level VOL and a number from 0-32.

2Press DSC repeatedly to select the desired

sound effect: CLASSIC (no indication)/ ROCK ( ) / JAZZ ( ) / POP ( ).

3Press DBB to switch bass enhancement on or off.

➜Display shows: DBB if the DBB is activated.

4Press INCREDIBLE SURR. (IS on the remote control) to switch the surround sound effect on or off.

➜Display shows: if activated.

Note:

–The effect of INCREDIBLE SURROUND may vary with different types of music.

English

remote control.

➜ The system will switch to the selected source.

To switch the system to standby mode

●	Press 2 STANDBY ON on the system or
	remote control.
●	If in tape mode or recording mode, press

5Press MUTE on the remote control to interrupt sound reproduction instantly.

➜ Playback will continue without sound and the display shows MUTE.

DSCDBB

MUTE

STOP•OPEN first.

➜ The volume level, interactive sound settings,

last selected source and tuner presets will be

retained in the player's memory.

●To activate sound reproduction you can:

–press MUTE again;

–adjust the volume controls;

–change source.

Power-saving automatic standby

As a power-saving feature, the system automatically switches to standby 15 minutes after a tape or CD has reached the end and no control is operated.

11