To stop the tape, press STOP•OPEN.
The keys are automatically released at the end of the tape, except if PAUSE has been activated.
Note:
– The sound source cannot be changed while recording a tape.
7
●
5 Press RECORD to start recording.
➜ Playing of the CD programme starts automatically from the beginning of the CD after 7 seconds. It is not necessary to start the CD player separately.
6 By pressing à or á on the system fast winding of tape is possible in both directions.
4 Press PLAY 2 to start playback.
5 To interrupt playback, press PAUSE.To resume, press this key again.
1 Select CD source.
2 Insert a disc and if desired, programme track numbers.
Insert a recorded tape and close the tape door. Load the tape with the open side downward and the full spool to the left.
3
●
Synchro start CD recording
To select and record a particular passage within a track:
● Press and hold down on PREV ¡1 or NEXT 2™ (on the remote control à or á ).
● When you recognise the passage you want, release PREV ¡1 or NEXT 2™.
● To interrupt disc playback, press PLAY•PAUSE 2; (on the remote control 2;).
● Recording will begin from this exact point in the track when you press RECORD.
3 Press STOP•OPEN to open the tape door.
4 Insert a suitable tape into the deck and close the tape door.
Press STOP•OPEN to open the tape door.
2
Tape playback
1 Select TAPE source.
➜ The display shows TAPE throughout tape operation.
Tape Operation / Recording
General information on recording
●Recording is permissible insofar as copyright or other rights of third parties are not infringed.
●For recording, use only NORMAL (IEC type I) tapes on which the tabs have not yet been broken.This deck is not suited for recording on METAL (IEC IV) type tapes.
●The best recording level is set automatically. Altering the VOLUME, INCREDIBLE SURROUND, DBB or INTERACTIVE SOUND controls will not affect the recording in progress.
●At the very beginning and end of the tape, no recording will take place during the 7 seconds when the leader tape passes the recorder heads.
●To protect a tape from accidental erasure, have the tape in front of you and break out the left tab. Recording on this side is no longer possible. If, however, you wish to record over this side again, cover the tabs with a piece of adhesive tape.
