GE PFIC1NFW Rough-in dimensions

Page 2

PFIC1NFW

GE ProfileCounter-Depth 20.9 Cu. Ft. Bottom-Freezer Drawer Refrigerator

Dimensions and Installation Information (in inches)

Rough-in dimensions

Standard, new construction and replacement installation Installation tips to maximize the built-in look

All wall/floor molding should be removed prior to installation.

Water recess on rear wall recommended to prevent water line damage. 48" minimum length, 1/4"-diameter water line tubing recommended.

When possible, recess both copper/pex water line and electrical outlet (see local codes).

Front and rear leveling legs are adjustable for the built-in look (see owner’s manual).

If optional collar trim kit is to be used or anticipated, see collar trim installation on next page for different rough- in dimensions.

24" Cabinet

Water Electrical

3/4" Airspace

(1/2" Gap + 1/4"

Wall Plates)

25"

Counter

Top

12" Soffit

8' Ceiling

70-1/4"*

21 cu. ft. models

24-1/2"

36-1/8"

13" to 14" Cabinet

For answers to your Monogram,® GE Profileor GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

*The rough-in dimensions of 70-1/4"/72-1/4" are minimum and measured from the finished floor to top of opening (or the underside of the overhead cabinets). For models with trim kit: If frameless style cabinets are planned for above the refrigerator, you may need to consider adding a maximum of 1/4" (70-1/2") to height of opening for 21 cu. ft. models to allow additional clearance between cabinet doors and top of refrigerator trim when cabinet doors are in open position.

Listed by

Underwriters

Laboratories

Specification Revised 6/07

210831

Image 2
Contents PFIC1NFW Rough-in dimensions Fabricating the enclosure Features and Benefits