Installation Instructions
8TRANSFER REFRIGERATOR DOOR HANDLE TO RIGHT
Refer to Remove the Fresh Food Door Handle and Attach the Fresh Food Door Handle sections for instructions.
9REHANG FREEZER DOOR (For models
with freezer door)
ALower the freezer door onto the bottom hinge pin. Ensure that the plastic hinge pin thimble is on the hinge pin or inside the door hinge pin hole located in the bottom of the door.
BStraighten the door and line it up with the center hinge bracket.
CInstall the center hinge pin with a 3/4″ socket ratchet/driver. Turn it until it extends through the hinge bracket and into the freezer door.
10REHANG REFRIGERATOR DOOR
ALower the refrigerator door onto the center hinge pin. Ensure that the plastic hinge pin thimble is on the center hinge pin or inside door hinge pin hole located in the bottom of the door.
10REHANG REFRIGERATOR DOOR (cont.)
BInsert the door thimble into the hinge hole on top of the refrigerator door and then insert the top hinge pin. Make sure the door is aligned with the cabinet. Attach the hinge to the top of the cabinet loosely with the bolts.
CMake sure the gasket on the door is flush against the cabinet and is not folded. Support the door on the handle side and make sure the door is straight and the gap between the doors is even across the front. While holding the door in place, tighten the top hinge bolts. Replace the hinge cover.
11INSTALL THE LOGO BADGE
Remove the adhesive backing paper and align the pins on the back of the badge with the holes in the door. Apply pressure to the badge to ensure it sticks to the door.
4