Operating Your Refrigerator, Temperature Control Dial

OPERATING YOUR REFRIGERATOR

Temperature Control Dial

The temperature control dial
has settings from “MIN”		4
to “MAX” plus “OFF” .
“MIN”	is the warmest.	3

“MAX”	is the coldest.	2

Initially set the

temperature control dial at “3” .

MAX

OFF

MIN

NOTE:

•If this refrigerator is unplugged or turned off, you must allow 3 minutes before starting it or plugging it back in. If you attempt to restart it in less than 3 minutes, it will not start.

•Turning the temperature control dial to “OFF” stops cooling but does not shut off power to the refrigerator.

After using the refrigerator for 24 hours, adjust the temperature control to the setting that is best suited to your needs.

Shelves

Shelves can be moved to different levels to suit your varying food storage needs. To remove a shelf, lift front slightly and pull straight out.

Ice Service

	Ice trays need to be set on the floor of the ice tray	Wash ice trays in lukewarm water only.
	compartment to freeze properly.	Do not put them in an automatic dishwasher.
	To release ice cubes, hold the tray upside down over	Ice Tray Compartment
	an ice bucket or bowl, and twist tray at both ends.	• This compartment is designed for production of
	If the ice tray freezes to the floor, pour a little	• This compartment is designed for production of
	If the ice tray freezes to the floor, pour a little	ice cubes and short-term storage (a few days at
	lukewarm water around it to loosen it. Do not use	the most) of some commercially frozen foods.
	boiling water which can damage plastic parts, or sharp	• The temperature in the ice tray compartment
	metal objects such as a knife or screwdriver which	• The temperature in the ice tray compartment
	metal objects such as a knife or screwdriver which	doesn’t get cold enough to freeze food safely.
	can damage the cooling system tubing.	doesn’t get cold enough to freeze food safely.
	can damage the cooling system tubing.

Defrosting

	Defrost whenever frost on the wall of the ice tray	Defrosting usually takes a few hours. To defrost faster,
	compartment becomes 1/4″ thick.	keep the door open. Also, pouring warm (not hot) water
	Never use a sharp or metallic instrument to remove	on the frosted part may speed defrosting. Do not use
	Never use a sharp or metallic instrument to remove	boiling water— it may damage plastic parts.
	frost as it may damage the cooling coils. (A punctured	boiling water— it may damage plastic parts.
	frost as it may damage the cooling coils. (A punctured
	cooling coil will cause serious problems and void the	After defrosting, empty water from the drip tray.
	warranty.) We recommend using a plastic scraper.	Wash the drip tray in warm water. Wipe the ice tray
	Do not use any electrical device in defrosting your	compartment with a damp cloth. Then turn the
	Do not use any electrical device in defrosting your	temperature control to the desired setting and return
	refrigerator.	temperature control to the desired setting and return
	refrigerator.	food and ice trays to the refrigerator.
	To defrost, remove foods and ice trays from the ice	food and ice trays to the refrigerator.
	To defrost, remove foods and ice trays from the ice	NOTE: If ice buildup is very thick, it may keep the
	tray compartment, put drip tray in place, and set	NOTE: If ice buildup is very thick, it may keep the
	tray compartment, put drip tray in place, and set	ice tray compartment door from opening or closing
	temperature control dial at “OFF”.	ice tray compartment door from opening or closing
	temperature control dial at “OFF”.	completely. Don’t try to force it open; after defrosting,
	4	completely. Don’t try to force it open; after defrosting,
	4	the door will open and close easily.