How to Set Your Oven for Convection Roasting When Using the Temperature Probe

NOTE: For best results when roasting large turkeys and roasts, we recommend using the probe included in the convection oven. For the correct placement of the probe, see the description in the Roasting section.

The display will flash if the probe is inserted into the outlet and you have not set a probe temperature and pressed START.

1. Place the shelf

in the lowest position

(A). Insert the probe into the meat.

2. Plug the probe into

 

the outlet in the

 

oven. Make sure

A

it is pushed all

 

the way in. Close

 

the oven door.

 

3. Press CONVECTION ROAST.

 

CONVECTION

 

R O A S T

 

4. Press the number pads to set the oven

 

temperature.

 

5. Press PROBE.

 

P R O B E

 

6.Press the number pads to set the internal meat temperature.

7.Press START.

START

The word “LO” will be in the display.

After the internal temperature of the meat reaches 100°F., the changing internal temperature will be shown in the display.

CLEAR

8. When the internal temperature of the meat

reaches the temperature you have set, the

OFF

 

probe and the oven turn off and the oven

 

control signals. To stop the signal, press

 

CLEAR/OFF. Use hot pads to remove the

 

probe from the food. Do not use tongs to

 

pull on it—they might damage it.

CAUTION: To prevent possible burns, do not unplug the probe from the oven outlet until the oven has cooled. Do not store the probe in the oven.

NOTE: You cannot use a timed oven operation when using the probe. You can use the KITCHEN TIMER ON/OFF for timing the cooking time.

To change the oven temperature during the Convection Roast cycle, press CONVECTION ROAST and set the new temperature.

19

Page 19
Image 19
GE Monogram ZET737 manual Reaches the temperature you have set