TIMED CONVECTION BAKING
How to Convection Time Bake
The oven control allows you to turn the oven on or off automatically at specific times that you set. Examples of Immediate Start (oven turns on now and you set it to turn off automatically at the end of cooking time) and Delay Start and Stop (setting the oven to turn on automatically at a later time and turn off after a preset cooking time) will be described.
NOTE: Before beginning, make sure the oven clock shows the correct time of day.
To set the clock, first press CLOCK. Press CLOCK the number pads to set the time of day.
Press START.
NOTE: An attention tone will sound if you are using Timed Baking and do not press START after entering the baking temperature.
How to Set Immediate Start and Automatic Stop Convection Bake
To avoid possible burns, place the oven shelves in the correct position before you turn the oven on.
The oven will turn on immediately and cook for a specific length of time. At the end of cooking time, the oven will turn off automatically.
NOTE:
• The low temperature zone of this oven (between |
170°F. and 200°F.) is available to keep hot cooked |
foods warm. Food kept in the oven longer than two |
hours at these low temperatures may spoil. |
CONVECTION
B A K E
C O O K I N G
T I M E
1.Press CONVECTION BAKE.
2.Press the number pads to set the temperature.
3.Press COOKING TIME.
NOTE: If your recipe requires preheating, you may need to add additional time to the length of the cooking time.
4.Press the number pads to set the length of baking time.
The oven temperature that you set and the cooking time that you entered will be displayed.
• Foods that spoil easily, such as milk, eggs, fish, |
stuffings, poultry and pork, should not be allowed |
to sit for more than one hour before or after cooking. |
Room temperature promotes the growth of harmful |
bacteria. Be sure the oven light is off because heat |
from the bulb will speed harmful bacteria growth. |
5.Press START.
START
The display shows the changing oven temperature and cooking time countdown. (The display starts changing once the temperature reaches 100°F.)
CLEAR | 6. Press CLEAR/OFF to clear the end of | |
cycle tone if necessary. | ||
OFF |
16