ROASTING WITH THE PROBE

(continued)

How to Set the Oven When Using the Temperature Probe

The display will flash if the probe is inserted into the outlet and you have not set a probe temperature and pressed START.

1.Insert the probe into the meat.

2.Plug the probe into the outlet in the oven. Make sure it’s pushed all the way in. Close the oven door.

3.Press PROBE.

P R O B E

4.Press the number pads to set the internal meat temperature.

5.Press BAKE.

BAKE

6.Press the number pads to set the oven temperature.

7.Press START.

START

The word “LO” will be in the display. After the internal temperature of the meat reaches 100°F., the changing internal temperature will be shown in the display.

CLEAR

8. When the internal temperature of the meat

reaches the temperature you have set, the

OFF

probe and the oven turn off and the oven

 

 

control signals. To stop the signal, press

 

CLEAR/OFF. Use hot pads to remove the

 

probe from the food. Do not use tongs to

 

pull on it—they might damage it.

CAUTION: To prevent possible burns, do not unplug the probe from the outlet until the oven has cooled. Do not store the probe in the oven.

NOTE: You can use the timer even though you cannot use timed oven operations.

To change the oven temperature during the roasting cycle, press BAKE and set the new

temperature.

28

Page 28
Image 28
GE Monogram ZET737 manual How to Set the Oven When Using the Temperature Probe