OPERATING THE SELF-CLEANING OVEN
(continued)
How to Set Oven for Cleaning
Easy Steps: | START | ||
1. | Press SELF CLEAN. |
| |
2. | Press the number pads to set the clean time. |
| |
3. | Press START. |
| |
|
|
|
|
|
| 1. Follow the steps in the Before a Clean |
|
|
| Cycle section. |
|
S E L F | 2. Press SELF CLEAN. | NOTE: | |
| |||
C L E A N |
| ||
|
| 3. Press the number pads to set the | D E L A Y |
|
| clean time, if a time other than 4 hours | S T A R T |
is needed.
Clean time is normally 4 hours. You can change the clean time to any time between 3 to 5 hours, depending on the amount of soil in your oven.
4.Press START.
The door locks automatically. The display will show the clean time remaining. It will not be possible to open the oven door until the temperature drops below the lock temperature and the LOCKED DOOR light goes off.
5.When the LOCKED DOOR light is off, open the door.
•You can find out when the clean cycle will start by pressing DELAY START.
•The display will flash and the control will beep if you set the clean cycle and forget to close the oven door.
To Stop a Clean Cycle
CLEAR | 1. Press CLEAR/OFF. |
| |
OFF |
|
2.When the oven has cooled below the locking temperature and the LOCKED DOOR light goes off, open the door.
34