GE SMR03BAV, SFR03BAV owner manual To defrost, After defrosting

Page 7

ge.com

Defrosting (models with freezer area)

Defrost whenever frost on the wall of the ice tray compartment becomes 1/4thick. Never use a sharp or metallic instrument to remove frost as it may damage the cooling coils. (A punctured cooling coil will cause serious problems and void the warranty.) We recommend using a plastic scraper. Do not use any electrical device in defrosting your refrigerator.

To defrost:

Remove foods and ice trays from the ice tray compartment.

Set the temperature control dial at OFF position.

On models without a drip tray, place a pan beneath the ice tray compartment to collect water.

Defrosting usually takes a few hours. To defrost faster, keep the door open. Also, pouring warm (not hot) water on the frosted part may speed defrosting. Do not use boiling water—it may damage plastic parts.

After defrosting:

Empty water from the drip tray or from the pan placed beneath the ice tray compartment. Wash the tray or pan with warm water.

Wipe the ice tray compartment with a damp cloth.

Turn the temperature control to the desired setting and return food and ice trays to the refrigerator.

NOTE: If ice buildup is very thick, it may keep the ice tray compartment door from opening or closing completely. Don’t try to force it open; after defrosting, the door will open and close easily.

Defrosting (all-refrigerator models)

Defrost whenever frost on the inside surfaces of the storage area becomes 1/8 (3 mm) thick. Never use a heater of any kind, scraper or sharp metallic instrument to remove frost as it may damage the refrigerator or cooling coils. ( A punctured cooling coil will cause serious problems and void the warranty.)

To defrost, unplug the refrigerator or turn the temperature control dial to the OFF position. Remove the contents and wipe inside surfaces and shelves with a clean towel. If frost does not come off easily, allow the frost to melt somewhat and wipe off.

After defrosting, make sure inside surfaces are dry; then return the contents to the refrigerator, plug unit back in and set

the temperature control to the desired setting.

Safety Instructions Operating Instructions Installation Instructions Troubleshooting Tips Consumer Support

7

Image 7
Contents See the Care and Cleaning Safety Information Operating InstructionsWrite the model and serial numbers here Model # Serial # Refrigerants Safety PrecautionsGe.com USE of Extension CordsWill About the refrigerator features Preparing for Vacation Care and cleaning of the refrigeratorCleaning the Outside Cleaning the InsideAfter defrosting To defrostLeveling Legs Preparing to install the refrigeratorConsumer Support Troubleshooting Read these instructions completely and carefullyDoor Reversal Preparing to install the refrigerator. Ge.com Consumer Support Troubleshooting Tips Problem Possible Causes What To Do Troubleshooting tipsSave time and money Outside of refrigerator Refrigerator too warmRefrigerator has odor Moisture forms onWhat GE Will Provide GE Refrigerator One-Year Limited WarrantyOrder to Make a Warranty Claim Instructions TroubleshootingContact Us Parts and AccessoriesConsumer Support GE Appliances Website Real Life Design Studio

SMR03BAV, SFR03BAV specifications

The GE SFR03BAV and SMR03BAV are innovative, high-performance devices designed to meet the evolving demands of today's industrial and commercial applications. Both models embody General Electric's commitment to quality, reliability, and cutting-edge technology.

The SFR03BAV is primarily known for its robust design and exceptional performance in various operational environments. It features advanced sensing capabilities, enabling precise measurements and controls. This model incorporates a microprocessor-based technology that allows for enhanced connectivity and data analysis, making it ideal for complex industrial systems. The device is equipped with a high-resolution display, providing users with real-time data and insights that facilitate informed decision-making.

On the other hand, the SMR03BAV is engineered to deliver maximum energy efficiency, making it suitable for applications that prioritize sustainability. This model utilizes smart technology that adapts to variable load conditions, optimizing performance while reducing energy consumption. The SMR03BAV also boasts a wireless communication feature, allowing for seamless integration into modern automation systems and remote monitoring capabilities.

Both the SFR03BAV and SMR03BAV utilize advanced algorithms for precise control and monitoring, ensuring optimal performance in various applications like HVAC systems, industrial machinery, and smart building technologies. They are designed to withstand harsh environmental conditions, featuring durable materials that ensure longevity and reliability.

Another notable characteristic of these models is their user-friendly interface, which simplifies setup and operation. The intuitive design enables quick navigation through various settings and configurations, minimizing downtime and enhancing productivity.

Moreover, both models comply with international safety and environmental standards, making them suitable for global applications. They are easy to install and maintain, reducing operational costs in the long run. GE's commitment to customer support is evident, with extensive resources available for troubleshooting and assistance.

In conclusion, the GE SFR03BAV and SMR03BAV represent the pinnacle of modern industrial technology, marrying advanced features with robust design principles. Their blend of efficiency, reliability, and ease of use makes them ideal choices for businesses looking to enhance their operational capabilities while maintaining a focus on sustainability and innovation.