Basic Functions, Switching the system on

Basic Functions

Important!

Before you operate the system, complete the preparation procedures.

Switching the system on

●Press STANDBY-ON(or B on the remote).

➜The system will switch to the last selected source.

●Press CD, TUNER or AUX on the remote control.

➜The system will switch to the selected source.

●Press OPEN•CLOSEç.

➜The system will switch to the CD source.

Switching the system to Standby mode

●Press STANDBY-ON(or B on the remote). ➜ The backlight for clock display is dim in standby.

●The volume level (up to a maximum volume level of 20), interactive sound settings, last selected mode, source and tuner presets will be retained in the player's memory.

Power Saving Automatic Standby

As a power-saving feature, the system automatically switches to Standby 15 minutes after a CD has reached the end and no control is operated.

Adjusting volume and sound

1Press VOLUME 3 / 4 (+/-) to decrease or increase the volume.

➜ Display shows the volume level VOL and a number from MIN1, 2, ...30, 31 MAX.

2Press DSC repeatedly to select the desired sound effect: ROCK/ JAZZ/ POP/ CLASSIC.

3Press DBB to switch bass enhancement on or off.

➜ Display shows: DBB.

4Press MUTE on the remote control to interrupt sound reproduction instantly.

➜ Playback will continue without sound and the display shows MUTE.

●To activate sound reproduction you can:

–press MUTE again;

–adjust the volume controls;

–change source.

English